PIR motion sensor switch
حساس حركة بالأشعة تحت الحمراء بفولتية 220 فولت وتيار 10 أمبير | AC 220V PIR Human Motion Sensor Switch, 10A
حساس حركة بالأشعة تحت الحمراء بفولتية 220 فولت وتيار 10 أمبير | AC 220V PIR Human Motion Sensor Switch, 10A — 6,525 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- Runs directly on 220V AC
- Maximum load current 10A
- Approximate detection range up to 6 meters
- Detection angle around 120 degrees
- Adjustable run time and light sensitivity
Ask about stock or request a better price
Price
6,525IQDIts price has held at 7,250 IQD for the last 11 days.
About this item
PIR motion sensor switch that runs directly on 220V AC and handles loads up to 10A, switching lights or fans automatically.
This is a PIR motion sensor switch that runs directly on 220V AC and handles a maximum load of 10A, so it connects between the mains and the load with no external relay or separate power supply. It detects motion through changes in the infrared radiation given off by the human body, and turns on a light or fan for an adjustable period before cutting it automatically.
The approximate detection range is up to 6 meters and the detection angle is wide, around 120 degrees. The run time after detection can be adjusted, and the light sensitivity can be set so it works at night only, which saves electricity by switching lights off automatically. It suits corridor and stair lighting, storerooms, garages and bathroom fans.
For safety, switch off the main breaker before wiring to 220V, and avoid pointing the sensor at heat sources or air conditioners, since a hot air current causes false triggering. Make sure your load is below 10A. The box contains a single sensor, and the condition is new with a 1-month warranty.
Suitable for
- Automatic corridor and stair lighting
- Storeroom and garage lighting
- Bathroom fans
- Energy-saving lighting setups
Seller's description
مفتاح حساس حركة يعمل مباشرة على فولتية 220 فولت ويتحمل حملاً حتى 10 أمبير، فيوصَّل بين الشبكة والحمل بلا حاجة إلى ريلاي خارجي أو مصدر تغذية منفصل. يكشف الحركة عبر تغيّر الأشعة تحت الحمراء المنبعثة من جسم الإنسان، ويشغّل الإنارة أو المروحة لمدة قابلة للضبط ثم يقطعها تلقائياً.
أبرز المزايا
- يعمل مباشرة على 220 فولت بلا مصدر تغذية إضافي
- يتحمل حملاً حتى 10 أمبير
- مدة التشغيل بعد الكشف قابلة للضبط
- حساسية الإضاءة قابلة للضبط للعمل ليلاً فقط
- يوفّر الكهرباء بإطفاء الإنارة تلقائياً
الاستخدامات الشائعة
- إنارة الممرات والسلالم تلقائياً
- إنارة المخازن والكراجات
- مراوح الحمامات ودورات المياه
- أنظمة الإنارة الموفّرة للطاقة
ملاحظة: عند التوصيل على 220 فولت افصل القاطع الرئيسي أولاً، وتجنّب توجيه الحساس نحو مصادر حرارة أو مكيّفات لأن تيار الهواء الساخن يسبّب تشغيلاً كاذباً.
What's in the box
حساس حركة PIR بفولتية 220 فولت واحد
Specifications
| Operating voltage | 220 فولت تيار متناوب |
|---|---|
| Maximum load current | 10 أمبير |
| Detection principle | أشعة تحت حمراء سلبية (PIR) |
| Approximate detection range | حتى 6 أمتار |
| Detection angle | واسعة تقارب 120 درجة |
| النوع | مفتاح حساس حركة PIR |
| مدة التشغيل | قابلة للضبط |
| حساسية الإضاءة | قابلة للضبط للعمل الليلي |
| التوصيل | مباشر على خط الشبكة بلا ريلاي خارجي |
| الاستعمال النموذجي | إنارة الممرات والمخازن تلقائياً |
| Category | Smart Home, IoT & Connected Appliances |
| More categories | IoT sensors |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0847 |




