Battery protection board
لوحة حماية BMS لسبع خلايا ليثيوم بتيار 30A مع مدخل حساس حراري NTC | 7S 30A BMS Board for 3.7V Lithium Battery with NTC Function
لوحة حماية BMS لسبع خلايا ليثيوم بتيار 30A مع مدخل حساس حراري NTC | 7S 30A BMS Board for 3.7V Lithium Battery with NTC Function — 12,500 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- For 7S packs, up to 30A
- 29.4V full charge voltage
- NTC thermistor input
- Overcharge, deep-discharge and short protection
- NTC sensor and balance wires included
Ask about stock or request a better price
Price
12,500IQDIts price has held at 12,500 IQD for the last 11 days.
About this item
BMS protection board for a 7S lithium pack with up to 30A operating current, 29.4V full charge and an NTC thermistor input.
A BMS protection board for a Li-ion pack of 7 cells in series (7S), with an operating current of up to 30A, a full charge voltage of 29.4V and a nominal voltage of 25.9V. Its standout feature is an NTC thermistor input that is stuck to the cells, adding a cut-off when the pack itself overheats rather than only when voltage or current limits are exceeded.
The listed protections are overcharge at about 4.25V per cell, deep discharge at about 2.5V per cell, and overcurrent and short-circuit. The board comes with balance wires for the middle cell points and an NTC sensor, and the cell type is lithium-ion 3.7V. It suits 7S packs for 24V systems, electric bikes, cordless tools, pumps and backup power systems.
When installing, stick the NTC sensor on a cell in the middle of the pack, not on the board, because the middle cell is surrounded by others and runs hotter, so its temperature reflects the pack's condition. The listing describes it as new with a 1-month warranty, and the box holds one 7S 30A BMS board with balance wires and an NTC sensor.
Suitable for
- 7S battery packs for 24V systems and electric bikes
- Enclosed applications where heat builds up
- Cordless power tools and pumps
Seller's description
لوحة حماية BMS لحزمة من سبع خلايا ليثيوم أيون بتيار 30A، تتميّز بوجود مدخل لمقاومة حرارية NTC تُلصق على جسم الخلايا. هذه الإضافة تعطي حماية لا توفّرها اللوحات العادية: الفصل عند ارتفاع حرارة الحزمة نفسها وليس فقط عند تجاوز الفولتية أو التيار، وهو السيناريو الأخطر في بطاريات الليثيوم.
أبرز المزايا
- مدخل NTC للفصل عند ارتفاع حرارة الخلايا
- سبع خلايا على التوالي بفولتية شحن كاملة 29.4V
- تيار تشغيل يصل إلى 30A
- حماية من الشحن الزائد والتفريغ العميق لكل خلية
- حماية من التيار الزائد والقصر
الاستخدامات الشائعة
- حزم بطاريات 7S لأنظمة 24V والدراجات الكهربائية
- التطبيقات المغلقة التي تتراكم فيها الحرارة
- العدد الكهربائية اللاسلكية والمضخات
- أنظمة الطاقة الاحتياطية المتنقلة
ملاحظة: ألصق حساس NTC على جسم الخلية الأوسط في الحزمة وليس على اللوحة؛ الخلية الوسطى هي الأسخن دائماً لأنها محاطة بغيرها، وقياس حرارتها هو المؤشر الحقيقي على حالة الحزمة.
What's in the box
لوحة حماية BMS واحدة 7S 30A مع أسلاك الموازنة وحساس NTC
Specifications
| Cell count | 7 خلايا على التوالي (7S) |
|---|---|
| Operating current | حتى 30A |
| Full charge voltage | 29.4V |
| Nominal voltage | 25.9V |
| Thermal protection | مدخل مقاومة حرارية NTC |
| Overcharge protection | نحو 4.25V لكل خلية |
| Deep-discharge protection | نحو 2.5V لكل خلية |
| حماية القصر والتيار الزائد | نعم |
| نوع الخلايا | ليثيوم أيون 3.7V |
| أسلاك الموازنة | نعم، لنقاط الخلايا الوسطى |
| Category | Automotive, Mobility & Transport Electronics |
| More categories | Battery-management systems |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0655 |




