Battery protection board
لوحة شحن وحماية BMS لست خلايا ليثيوم أيون بتيار 15A | 6S 15A Li-ion BMS Charge and Protection Board
لوحة شحن وحماية BMS لست خلايا ليثيوم أيون بتيار 15A | 6S 15A Li-ion BMS Charge and Protection Board — 5,738 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- For 6S packs at 15A
- 25.2V full charge voltage
- Monitors each cell separately
- Overcharge, deep-discharge and short protection
- Balance wires included
Ask about stock or request a better price
Price
5,738IQDIts price has held at 6,750 IQD for the last 11 days.
About this item
BMS protection board for a 6S Li-ion pack with a 15A operating current and 25.2V full charge voltage, with balance wires.
A BMS protection board for a Li-ion pack of 6 cells in series (6S) with a 15A operating current, a full charge voltage of 25.2V and a nominal voltage of 22.2V. It monitors each cell separately and disconnects the pack on overcharge, deep discharge or short-circuit. 15A suits medium applications that do not need high peak currents.
The listing states overcharge protection at about 4.25V per cell, deep discharge at about 2.5V per cell, and short-circuit and overcurrent protection, with balance wires for the middle cell points. The cell type is lithium-ion 3.7V, and the typical use is mobile 24V systems, including lights, power tools and backup power for small devices.
Use cells of the same type and capacity and start with a pack balanced by hand before installing, because the board protects against excursions but cannot fix a pack built from cells with large differences. The listing describes it as new with a 1-month warranty, and the box holds one 6S 15A BMS board with balance wires, without cells.
Suitable for
- 6S battery packs for 24V systems
- Lights and lighting systems running on battery
- Backup power for small devices
Seller's description
لوحة حماية BMS لحزمة من ست خلايا ليثيوم أيون على التوالي بتيار تشغيل 15A وفولتية شحن كاملة 25.2V. تراقب كل خلية على حدة وتفصل الحزمة عند الشحن الزائد أو التفريغ العميق أو القصر. تيار 15A مناسب للتطبيقات المتوسطة التي لا تحتاج تيارات الذروة العالية.
أبرز المزايا
- ست خلايا على التوالي بفولتية شحن كاملة 25.2V
- تيار تشغيل 15A يغطي معظم التطبيقات المتوسطة
- مراقبة فولتية كل خلية على حدة
- حماية من الشحن الزائد والتفريغ العميق والقصر
- أسلاك موازنة لتوصيل نقاط الخلايا الوسطى
الاستخدامات الشائعة
- حزم بطاريات 6S لأنظمة 24V
- مصابيح وأنظمة إنارة تعمل على بطارية
- مشاريع الطاقة المتنقلة والعدد الكهربائية
- أنظمة الطاقة الاحتياطية للأجهزة الصغيرة
ملاحظة: استعمل خلايا متطابقة النوع والسعة وابدأ بحزمة موزونة يدوياً قبل التركيب؛ لوحة الحماية تحمي من التجاوزات لكنها لا تصلح حزمة بنيت أصلاً من خلايا متباينة بفوارق كبيرة.
What's in the box
لوحة حماية BMS واحدة 6S 15A مع أسلاك الموازنة (بدون خلايا)
Specifications
| Cell count | 6 خلايا على التوالي (6S) |
|---|---|
| Operating current | حتى 15A |
| Full charge voltage | 25.2V |
| Nominal voltage | 22.2V |
| Cell type | ليثيوم أيون 3.7V |
| Overcharge protection | نحو 4.25V لكل خلية |
| Deep-discharge protection | نحو 2.5V لكل خلية |
| حماية القصر والتيار الزائد | نعم |
| أسلاك الموازنة | نعم، لنقاط الخلايا الوسطى |
| الاستعمال النموذجي | أنظمة 24V المتنقلة |
| Category | Automotive, Mobility & Transport Electronics |
| More categories | Battery-management systems |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0675 |




