XH connector cable
كيبل موصل XH2.54 بستة أطراف خطوة 2.54mm بأسلاك 24AWG بطول 200mm | 6-Pin XH 2.54mm Pitch Connector Cable with 24AWG Leads, 200mm
كيبل موصل XH2.54 بستة أطراف خطوة 2.54mm بأسلاك 24AWG بطول 200mm | 6-Pin XH 2.54mm Pitch Connector Cable with 24AWG Leads, 200mm — 1,925 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- XH series, 2.54mm pitch, 6 pins
- Colour-coded 24AWG leads, 200mm long
- Pre-crimped, no crimping tool needed
- Side latch on the housing resists vibration
- Larger contacts and higher current than PH2.0
- New, with a 1-month warranty
Ask about stock or request a better price
Price
1,925IQDIts price has held at 2,750 IQD for the last 11 days.
About this item
Pre-crimped XH-series connector cable with 2.54mm pitch, 6 pins and colour-coded 24AWG leads 200mm long, for linking controller boards, sensors and battery packs.
This is an XH-series connector cable with a 2.54mm pitch, meaning the contacts sit 2.54mm apart, the same spacing used by the pin headers on development boards. It carries 6 pins in a single detachable link, and the leads come pre-crimped in 24AWG wire 200mm long, so no crimping tool is needed.
According to the listing, XH contacts are larger and sturdier than PH2.0 contacts, so they carry more current and stand up to repeated plugging, and 24AWG wire carries more current than 26AWG leads. The wires are colour-coded so each line is easy to trace, and the housing has a side latch that stops the link from shaking loose. That suits power and signal lines together on controller boards, sensor and actuator modules, battery packs, balance boards and CNC boards.
Before connecting, check the pin order on your board, and do not rely on a single pin to carry high current; spread the load across several parallel pins when needed. It mates with XH2.54 sockets on boards and with 2.54mm headers. The pack holds a single XH2.54 cable, and it is new with a 1-month warranty.
Suitable for
- Linking controller boards to sensor and actuator modules
- Multi-line battery pack and balance board leads
- Wiring CNC control boards
- Internal links in locally built devices
Seller's description
كيبل موصل من سلسلة XH بخطوة 2.54mm وستة أطراف، مركّب مسبقًا على أسلاك ملوّنة بمقطع 24AWG وطول 200mm. الخطوة 2.54mm هي القياس القياسي نفسه المستخدم في مساطر الأطراف (headers) على لوحات التطوير، والتماسات أكبر من سلسلة PH2.0 فتتحمل تيارًا أعلى، ما يجعله مناسبًا للتغذية والإشارات معًا في وصلة واحدة قابلة للفصل.
أبرز المزايا
- خطوة 2.54mm متوافقة مع القياس الشائع في لوحات التطوير
- ستة خطوط في وصلة واحدة للتغذية والإشارات
- مقطع 24AWG يتحمل تيارًا أعلى من أسلاك 26AWG
- أسلاك ملوّنة بطول 200mm تسهّل التمديد والتتبع
- حاضنة بقفل جانبي تمنع الانفصال بالاهتزاز
- تماسات XH أكبر وأمتن من تماسات PH2.0 للاستعمال المتكرر
الاستخدامات الشائعة
- توصيل لوحات التحكم بوحدات الحساسات والمشغلات
- حزم البطاريات ولوحات الموازنة متعددة الخطوط
- الطابعات ثلاثية الأبعاد ولوحات CNC
- الوصلات الداخلية في الأجهزة المصنّعة محليًا
ملاحظة: تحقق من ترتيب الأطراف على اللوحة قبل التوصيل، ولا تعتمد الموصل وحده في نقل تيار عالٍ عبر طرف واحد؛ عند الحاجة إلى تيار أكبر وزّع الحمل على أكثر من طرف متوازٍ.
What's in the box
كيبل موصل XH2.54 واحد بستة أطراف مع أسلاك 24AWG بطول 200mm
Specifications
| Series | XH (خطوة 2.54mm) |
|---|---|
| Pitch | 2.54mm |
| Pin count | 6 Pin |
| Wire length | 200mm |
| Wire gauge | 24AWG |
| Line marking | أسلاك بألوان مختلفة |
| Lock type | قفل جانبي على الحاضنة |
| Electrical feature | تماسات أكبر وتيار أعلى من PH2.0 |
| Compatibility | مقابس XH2.54 على اللوحات ومساطر 2.54mm |
| Crimping tool needed | لا — الأسلاك مركّبة مسبقًا |
| Use | لوحات التحكم وحزم البطاريات والطابعات ثلاثية الأبعاد |
| Box contents | كيبل موصل XH2.54 واحد |
| Category | Semiconductors, ICs & Electronic Components |
| More categories | Electromechanical components & connectors |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0489 |




