5V DC power adapter
محوّل طاقة 5V بتيار 2A قدرة 10W | 5V 2A DC Power Adapter, 10W
محوّل طاقة 5V بتيار 2A قدرة 10W | 5V 2A DC Power Adapter, 10W — 5,250 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- Regulated 5V DC output at 2A
- 10W power
- Internal short-circuit protection
- Recommended continuous load up to 1.6A
- New, with a 1-month warranty
Ask about stock or request a better price
Price
5,250IQDIts price has held at 5,250 IQD for the last 11 days.
About this item
Switching power adapter with a 5V DC output, 2A current and 10W power, for development boards and small electronics projects.
This is a switching power adapter with a closed body that converts mains voltage to a regulated 5V DC output at 2A, which is 10W. The listing says it suits powering development boards and small projects that a computer USB port cannot feed enough, because it gives steady current without a voltage drop when running a screen or a set of sensors alongside the controller.
Uses named in the listing include powering Arduino, ESP32 and ESP8266 boards through the power input, running small USB hubs and mini router devices, a 5V source for short WS2812 LED strips and relays, and charging small devices with a 5V input. Before buying, confirm your device runs on 5V and that the plug shape fits its input, as the listing does not specify the plug type.
The listing recommends a continuous load that does not exceed 1.6A, says the adapter is fine for 24/7 operation within its rated load, and notes internal short-circuit protection. Use it indoors in a dry place away from moisture and heat. When extending a 5V cable, watch the wire gauge, because the voltage drop over a long thin wire can bring the voltage below 4.7V and cause repeated controller restarts.
It is new, and the box holds one 5V/2A power adapter. The warranty is listed as 1 months.
Suitable for
- Powering Arduino, ESP32 and ESP8266 boards
- Running small USB hubs and mini routers
- A 5V source for short WS2812 strips and relays
Seller's description
محوّل طاقة مفتاحي يحوّل فولتية الشبكة إلى خرج منظّم 5V DC بتيار 2A أي قدرة 10W. هذه القيمة هي المعيار العملي لتغذية لوحات التطوير والمشاريع الصغيرة التي لا يكفيها منفذ USB في الحاسبة، إذ يوفّر تياراً ثابتاً دون هبوط في الفولتية عند تشغيل شاشة أو مجموعة حساسات مع المتحكّم في الوقت نفسه.
أبرز المزايا
- خرج 5V DC منظّم بتيار مستمر 2A وقدرة 10W
- فولتية ثابتة تمنع إعادة التشغيل العشوائي للمتحكّمات عند ارتفاع الحمل
- جسم مغلق وخفيف يوصَل مباشرة بمأخذ الجدار
- حماية داخلية من التماس تفصل الخرج عند حدوث قصر
- مناسب للتشغيل المستمر 24 ساعة في المشاريع المنزلية
الاستخدامات الشائعة
- تغذية لوحات Arduino وESP32 وESP8266 عبر مدخل التغذية
- تشغيل موزّعات USB صغيرة وأجهزة الراوتر المصغّرة
- مصدر 5V لأشرطة الليد WS2812 القصيرة والريلايات
- شحن الأجهزة الصغيرة ذات مدخل 5V
ملاحظة: راقب مقطع الأسلاك عند إطالة كيبل 5V، فهبوط الفولتية على سلك رفيع طويل قد يوصل الفولتية إلى ما دون 4.7V ويسبب إعادة تشغيل متكرّرة للمتحكّم.
What's in the box
محوّل طاقة 5V/2A واحد.
Specifications
| Output voltage | 5V DC |
|---|---|
| Maximum output current | 2A |
| Power | 10W |
| Adapter type | مفتاحي (Switching) بجسم مغلق |
| Protection | حماية داخلية من التماس |
| Recommended continuous load | لا يتجاوز 1.6A |
| الدخل | تيار متناوب AC بفولتية الشبكة |
| تنظيم الخرج | فولتية ثابتة عند تغيّر الحمل |
| دورة التشغيل | يصلح للعمل المستمر 24/7 ضمن الحمل الاسمي |
| الاستخدام الموصى به | حمل مستمر لا يتجاوز 1.6A |
| بيئة الاستخدام | داخلي جاف بعيداً عن الرطوبة والحرارة |
| Category | Power, Charging, Batteries & Energy Electronics |
| More categories | Power supplies |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0491 |




