Infrared LED

ليد LED باعث للأشعة تحت الحمراء قياس 5mm بطول موجي 940nm | 5mm Infrared Emitter LED 940nm Through-Hole

⁨ليد LED باعث للأشعة تحت الحمراء قياس 5mm بطول موجي 940nm | 5mm Infrared Emitter LED 940nm Through-Hole⁩ — ⁨1,750 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • 940nm wavelength
  • 5mm through-hole body
  • 20mA typical operating current
  • Works with 38kHz IR receivers
  • New, with a 1-month warranty
1,750IQD2,500IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

1,750IQD

Its price has held at 2,500 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

5mm infrared emitter LED with a 940nm wavelength, suited to remote-control circuits, proximity sensors and beam breakers.

This is a 5mm through-hole infrared emitter LED with a 940nm wavelength, the standard wavelength in remote controls and optical beam breakers. The lens is clear and the light is invisible to the naked eye, so it does not bother users in home applications.

The typical operating current is 20mA continuous and the forward voltage drop is between 1.2V and 1.4V, which makes it easy to run from 5V with a simple series current-limiting resistor, which the listing says must be added externally. It can be driven with higher current pulses in transmitter circuits to extend range, since it tolerates a higher peak current in intermittent transmission. Its response is fast enough to allow modulation on a 38kHz carrier.

The compatibility mentioned is with IR receivers such as the VS1838B and TSOP at 38kHz. For polarity, the longer lead is positive (anode) and the flat edge is negative, so check the direction when wiring. It has wire leads that suit boards and prototyping boards.

Uses include building remote controls and simulating remote signals, proximity sensors and optical beam breakers. The part is new with a 1-month warranty, and the box holds 1 5mm infrared emitter LED.

Suitable for

  • Building remote controls and simulating remote signals
  • Proximity sensors
  • Optical beam breakers

Seller's description

ليد باعث للأشعة تحت الحمراء بطول موجي 940nm وقطر 5mm من نوع through-hole، وهو الطول الموجي القياسي في أجهزة التحكم عن بُعد وقواطع الحزمة الضوئية. تيار التشغيل الاعتيادي 20mA وهبوط الفولتية الأمامي بين 1.2V و1.4V، ويمكن تشغيله بنبضات تيار أعلى في دوائر الإرسال لزيادة المدى. عدسته شفافة أو خفيفة الزرقة ولا يُرى ضوؤه بالعين المجردة.

أبرز المزايا

  • طول موجي 940nm متوافق مع مستقبلات IR الشائعة مثل VS1838B و TSOP
  • هبوط فولتية أمامي منخفض 1.2V–1.4V يسهّل تشغيله من 5V بمقاومة بسيطة
  • يتحمل نبضات تيار أعلى من 20mA في وضع الإرسال المتقطع لزيادة المدى
  • حزمة 5mm سلكية سهلة التركيب على اللوحات ولوحات النموذج
  • ضوء غير مرئي للعين فلا يزعج المستخدم في التطبيقات المنزلية
  • زمن استجابة سريع يسمح بالتشكيل على تردد حامل 38kHz

الاستخدامات الشائعة

  • بناء أجهزة تحكم عن بُعد ومحاكاة إشارات الريموت
  • قواطع الحزمة الضوئية وحساسات العدّ والحضور
  • حساسات القرب وتتبع الخط في الروبوتات
  • إنارة الأشعة تحت الحمراء لكاميرات المراقبة الليلية

ملاحظة: لا تشغّله أبدًا بدون مقاومة تحديد تيار على التوالي، واحسبها من فولتية المصدر ناقص هبوط الليد؛ ولاختبار عمله وجّه كاميرا الهاتف نحوه فستظهر ومضة بنفسجية على الشاشة.

What's in the box

ليد LED باعث للأشعة تحت الحمراء 5mm واحد

Specifications

TypeIR emitter LED (باعث أشعة تحت حمراء)
Wavelength940nm
Diameter5mm
Typical operating current20mA مستمر
Forward voltage drop1.2V – 1.4V
Compatibilityمستقبلات IR مثل VS1838B و TSOP بتردد 38kHz
التشغيل النبضييتحمل تيار ذروة أعلى في الإرسال المتقطع
نوع التركيبThrough-hole (سلكي، طرفان)
تمييز القطبيةالطرف الأطول موجب (أنود) والحافة المسطحة سالبة
لون العدسةشفافة — الضوء غير مرئي للعين
متطلبات خارجيةمقاومة تحديد تيار على التوالي
الاستخدامأجهزة الريموت وحساسات القرب وقواطع الحزمة
CategorySemiconductors, ICs & Electronic Components
More categoriesSemiconductors
ConditionNew
Warranty1-month warranty
SKUNTK-0107

Questions about ليد LED باعث للأشعة تحت الحمراء قياس 5mm بطول موجي 940nm | 5mm Infrared Emitter LED 940nm Through-Hole

It currently costs 1,750 IQD (was 2,500 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
Yes, the listing says it needs a series current-limiting resistor.
Yes, the listing mentions compatibility with IR receivers such as the VS1838B and TSOP at 38kHz.
The longer lead is positive (anode) and the flat edge marks the negative lead.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.