Alligator test clip

مشبك تمساح للقياس 58mm معزول HV لقابس موز 4mm | 58mm HV Insulated Alligator Test Clip for 4mm Banana Plug

⁨مشبك تمساح للقياس 58mm معزول HV لقابس موز 4mm | 58mm HV Insulated Alligator Test Clip for 4mm Banana Plug⁩ — ⁨3,613 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • 58mm length with a serrated spring jaw
  • HV insulated sleeve
  • Rear socket for a 4mm banana plug
  • Plated metal conductive part
  • Sold as one piece, new with a 1-month warranty
3,613IQD4,250IQDخصم 15%In stock
1

Ask about stock or request a better price

Price

3,613IQD

Its price has held at 4,250 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

58mm alligator test clip with an HV insulated sleeve and a rear socket that takes a 4mm banana plug.

A 58mm alligator test clip with an insulated sleeve rated for high voltage (HV) and a rear socket that takes a standard 4mm banana plug. It fits onto the ends of multimeter leads or a lab power supply to hold the test point on a wire or component lead, freeing your hands while you work.

The jaw is serrated and spring-loaded and grips thick leads firmly; the listing states it is much larger than test hooks made for SMD chip legs and than 45mm clips. The conductive part is plated metal for low-resistance contact, the spring keeps a steady contact pressure through the measurement, and it can be swapped quickly between multimeter leads and a power supply.

It suits long measurements on lab power supplies, checking power boards, transformers and battery terminals, temporarily connecting test loads and resistors, and labs and workshops that use banana leads. Before buying, make sure your leads end in a 4mm banana plug.

Note from the listing: the insulation lowers the risk of accidental touch but does not raise your meter's CAT category, so stay within the voltage limits printed on your multimeter and its leads, and disconnect power before fixing the clip where possible. It is sold as a single piece and is new with a 1-month warranty.

Suitable for

  • Long measurements on lab power supplies
  • Checking power boards, transformers and battery terminals
  • Temporarily connecting test loads and resistors

Seller's description

مشبك تمساح للقياس بطول 58mm بغلاف عازل مخصص للجهد العالي، مزوّد بمقبس خلفي يستقبل قابس الموز 4mm القياسي. يُركّب على أطراف أسلاك الأفوميتر أو مزود الطاقة المختبري لتثبيت نقطة القياس على سلك أو طرف مكوّن وتحرير اليدين أثناء العمل. فكّه المسنّن النابضي يمسك الأطراف السميكة بثبات، وهو أكبر بكثير من خطافات الاختبار المخصصة لأرجل الشرائح SMD.

أبرز المزايا

  • طول 58mm بفك واسع يمسك الأطراف والقضبان السميكة
  • غلاف عازل HV يغطي جسم المشبك ويقلل خطر اللمس العرضي
  • مقبس خلفي قياسي 4mm يقبل أي قابس موز (banana)
  • يتبدل بسرعة بين أسلاك الأفوميتر ومزود الطاقة
  • فك نابضي يحافظ على ضغط تماس ثابت طوال القياس

الاستخدامات الشائعة

  • القياس المطوّل على مزودات الطاقة المختبرية
  • فحص لوحات الطاقة والمحولات وأطراف البطاريات
  • توصيل الأحمال والمقاومات الاختبارية مؤقتاً
  • مختبرات التعليم والورش التي تعتمد أسلاك banana

ملاحظة: العزل يقلل خطر اللمس لكنه لا يرفع فئة القياس CAT لجهازك؛ التزم بحدود الفولتية المطبوعة على الأفوميتر وأسلاكه، وافصل التغذية قبل تثبيت المشبك على نقطة القياس كلما أمكن.

What's in the box

مشبك تمساح واحد

Specifications

Length58mm
Insulationغلاف عازل لفولتية عالية HV
Mountingمقبس خلفي لقابس موز 4mm (Banana)
Jaw typeمسنّن بنابض للإمساك بالأطراف السميكة
Compatibilityأسلاك الأفوميتر ومزودات الطاقة بنظام 4mm
الجزء الموصلمعدن مطلي لتماس منخفض المقاومة
الاستخدام الأساسيتثبيت نقطة القياس وتحرير اليدين
المقاس مقارنة بالبدائلأكبر من خطافات SMD ومشابك 45mm
حدود الاستخدامضمن فئة الفولتية المحددة للجهاز وأسلاكه
البيعقطعة واحدة
CategoryManufacturing, Maker, Lab & Test Equipment
More categoriesMultimeters
ConditionNew
Warranty1-month warranty
SKUNTK-0164

Questions about مشبك تمساح للقياس 58mm معزول HV لقابس موز 4mm | 58mm HV Insulated Alligator Test Clip for 4mm Banana Plug

It currently costs 3,613 IQD (was 4,250 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
A standard 4mm banana plug through the rear socket.
58mm, according to the listing.
No, the listing makes clear it does not raise your meter's CAT category, so stay within the voltage limits printed on it.
It is sold as a single piece, according to the listing.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.