18650 battery holder
حاضنة بطارية بلاستيكية لأربع خلايا 18650 | 4x 18650 Lithium Battery Holder Case
حاضنة بطارية بلاستيكية لأربع خلايا 18650 | 4x 18650 Lithium Battery Holder Case — 2,975 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- Holds four 18650 cells
- Metal spring contacts
- Swap cells without soldering
- Sold without cells or BMS
- New, 1 months warranty
Ask about stock or request a better price
Price
2,975IQDIts price has held at 3,500 IQD for the last 11 days.
About this item
Plastic holder for four 18650 cells with hand-swappable cells and no soldering to the cells; sold empty, without batteries or a protection board.
This is a plastic holder for four 18650 lithium cells. Metal spring contacts touch both terminals so cells can be swapped by hand without soldering to the cells. It is sold empty, without cells or a BMS protection board, so it is an assembly part rather than a ready-made battery.
It can be used to build 4S packs giving about 16.8V at full charge, or a 2S2P arrangement depending on how the contact tabs are wired, and it suits projects where cells must be removed for external charging or periodic checks. Wires are soldered to the contact tabs, and the body has screw holes for mounting inside an enclosure. For a series connection use a 4S BMS board for four cells, and watch the polarity printed at each slot because the holder does not prevent reversal. The item is new with a 1 months warranty.
Suitable for
- Building 4S packs for portable power projects
- Handmade torches and emergency lights
- Testing cells and capacity before building a pack
Seller's description
حاضنة بلاستيكية لأربع خلايا ليثيوم 18650 تُثبَّت فيها الخلايا بألسنة نابضية تلامس القطبين، فتُبدَّل باليد دون لحام. تُستخدم في بناء حزم 4S للحصول على نحو 16.8V عند الشحن الكامل، أو في ترتيبات 2S2P حسب طريقة توصيل الألسنة. مناسبة للمشاريع التي تحتاج فك الخلايا للشحن الخارجي أو للفحص الدوري، وتُباع فارغة بدون بطاريات أو لوحة حماية.
أبرز المزايا
- تتسع لأربع خلايا 18650 قياسية
- ألسنة نابضية تحافظ على تماس ثابت مع القطبين
- تبديل الخلايا باليد دون لحام أو أدوات
- تسمح بترتيب 4S أو 2S2P حسب طريقة التوصيل
- جسم بلاستيكي يعزل الخلايا عن جسم الجهاز
- فتحات تثبيت للتركيب داخل العلب
الاستخدامات الشائعة
- حزم الطاقة المحمولة ومشاريع الإلكترونيات
- الكشافات ومصابيح الطوارئ المصنوعة يدوياً
- تجميع حزم 16.8V مع لوحة حماية 4S
- فحص الخلايا وتجارب السعة قبل بناء الحزمة
ملاحظة: إذا وصّلت الخلايا على التوالي فاستخدم لوحة BMS بأربع خلايا 4S للحماية والموازنة، وتأكد من اتجاه القطبية المطبوع في كل مقعد لأن الحاضنة لا تمنع العكس.
What's in the box
حاضنة بطارية لأربع خلايا 18650 واحدة (بدون بطاريات)
Specifications
| Compatible cell size | 18650 |
|---|---|
| Cell count | 4 خلايا |
| Material | بلاستيك |
| Contact type | ألسنة نابضية معدنية |
| Possible arrangement | 4S أو 2S2P حسب التوصيل |
| Output voltage | نحو 16.8V في ترتيب 4S عند الشحن الكامل |
| Contents | بدون خلايا وبدون BMS |
| طريقة التوصيل | لحام الأسلاك على ألسنة التماس |
| الميزة | تبديل الخلايا دون لحام |
| التثبيت | فتحات براغي للتركيب داخل العلبة |
| Category | Power, Charging, Batteries & Energy Electronics |
| More categories | Batteries and battery packs |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0311 |




