4S BMS board

لوحة حماية BMS لحزم ليثيوم أيون 4S تيار 30A فولتية 14.8V | 4S 30A Li-ion BMS Protection Board 14.8V / 16.8V for 18650 Packs

⁨لوحة حماية BMS لحزم ليثيوم أيون 4S تيار 30A فولتية 14.8V | 4S 30A Li-ion BMS Protection Board 14.8V / 16.8V for 18650 Packs⁩ — ⁨4,888 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • 4S layout at 14.8V nominal
  • 16.8V full-charge voltage
  • 30A continuous discharge
  • Independent monitoring of each cell
  • New, with a 1-month warranty
4,888IQD5,750IQDخصم 15%In stock
1

Ask about stock or request a better price

Price

4,888IQD

Its price has held at 5,750 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

BMS protection board for 4S Li-ion packs, 14.8V nominal and 16.8V full charge, with discharge current up to 30A for heavy loads.

A BMS protection board for 4S lithium-ion packs, with 14.8V nominal voltage, 16.8V full-charge voltage and discharge current of up to 30A. It is designed for heavy loads such as motors and inverters, and uses low-resistance MOSFET transistors and wide copper traces. It monitors each cell individually and disconnects the pack immediately on overcharge, deep discharge, overcurrent or short circuit.

Core values: continuous discharge current 30A, charge cut-off at about 4.2V per cell and discharge cut-off at about 2.5V per cell. The terminals are B-, B1, B2, B3, B+ and P-, and the board monitors each cell independently during charging. The listing says the wide copper traces reduce heat at high current and that short-circuit protection is instantaneous.

Compatible cells named: 18650 and 21700 high-discharge cells at 3.7V; it is not compatible with LiFePO4 cells at 3.2V. The recommended wire is 12AWG or an equivalent nickel strip, and at currents near 30A use 12AWG wire or wide nickel strip and mount the board away from the cell bodies to dissipate MOSFET heat.

Suggested uses: 14.8V packs for DC motors and small bikes, medium-power inverters and DC-DC converters, portable power boxes and workshop lighting systems, and refurbishing batteries of high-drain power tools. In the box: one 4S, 30A BMS protection board. It is new, with a 1-month warranty.

Suitable for

  • 14.8V packs for DC motors and small bikes
  • Medium-power inverters and DC-DC converters
  • Refurbishing power-tool batteries

Seller's description

لوحة حماية BMS لحزم ليثيوم أيون بترتيب 4S، بجهد اسمي 14.8V وجهد شحن كامل 16.8V وتيار تفريغ يصل إلى 30A. صُمِّمت للأحمال المرتفعة مثل المحركات والمحوّلات، وتعتمد على ترانزستورات MOSFET منخفضة المقاومة ومسارات نحاسية عريضة. تراقب كل خلية على حدة وتفصل الحزمة فوراً عند الشحن الزائد أو التفريغ العميق أو تجاوز التيار أو القِصَر.

أبرز المزايا

  • تيار تفريغ يصل إلى 30A للأحمال المحرّكية والعاكسات الصغيرة
  • مراقبة مستقلة للخلايا الأربع عبر أسلاك الموازنة
  • جهد شحن كامل 16.8V مع فصل عند نحو 4.2V لكل خلية
  • فصل التفريغ عند نحو 2.5V لكل خلية
  • مسارات نحاسية عريضة تقلل الحرارة عند التيار العالي
  • حماية قِصَر لحظية تحمي الأسلاك والمفاتيح

الاستخدامات الشائعة

  • حزم 14.8V لمحركات DC والدراجات الصغيرة
  • عاكسات ومحولات DC-DC بقدرة متوسطة
  • صناديق طاقة محمولة وأنظمة إنارة الورش
  • ترميم بطاريات العدد الكهربائية عالية الاستهلاك

ملاحظة: عند التيارات القريبة من 30A استعمل أسلاكاً بمقطع 12AWG أو شريط نيكل عريضاً، وثبّت اللوحة بعيداً عن جسم الخلايا لتصريف حرارة الـMOSFET.

What's in the box

لوحة حماية BMS بترتيب 4S وتيار 30A واحدة

Specifications

Cell count4S بجهد اسمي 14.8V
Full-charge voltage16.8V
Continuous discharge30A
Charge cut-offنحو 4.2V لكل خلية
Discharge cut-offنحو 2.5V لكل خلية
TerminalsB- و B1 و B2 و B3 و B+ و P-
Recommended wire12AWG أو شريط نيكل مكافئ
Compatible cells18650 و 21700 عالية التفريغ بجهد 3.7V
وظائف الحمايةشحن زائد، تفريغ عميق، تيار زائد، قِصَر
تصميم المساراتنحاس عريض مع MOSFET منخفضة المقاومة
الموازنةمراقبة مستقلة لكل خلية أثناء الشحن
غير متوافقة معخلايا LiFePO4 بجهد 3.2V
CategoryAutomotive, Mobility & Transport Electronics
More categoriesBattery-management systems
ConditionNew
Warranty1-month warranty
SKUNTK-0188

Questions about لوحة حماية BMS لحزم ليثيوم أيون 4S تيار 30A فولتية 14.8V | 4S 30A Li-ion BMS Protection Board 14.8V / 16.8V for 18650 Packs

It currently costs 4,888 IQD (was 5,750 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
30A continuous discharge, according to the listing.
No, the listing says it is not compatible with LiFePO4 cells at 3.2V.
12AWG or an equivalent nickel strip, according to the listing.
16.8V for the 4S pack, according to the listing.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.