Battery protection board
لوحة حماية BMS لأربع خلايا ليثيوم 16.8V بتيار 25A | 4S 25A 16.8V Li-ion BMS Protection Board for 18650 Packs
لوحة حماية BMS لأربع خلايا ليثيوم 16.8V بتيار 25A | 4S 25A 16.8V Li-ion BMS Protection Board for 18650 Packs — 6,525 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- For 4S packs, 16.8V full charge
- Operating current up to 25A
- Monitors each cell separately
- Overcharge, deep-discharge and short protection
- Balance wires included
Ask about stock or request a better price
Price
6,525IQDIts price has held at 7,250 IQD for the last 11 days.
About this item
BMS protection board for a 4S Li-ion pack with 16.8V full charge and an operating current of up to 25A, with balance wires.
A BMS protection board for a Li-ion pack of 4 cells in series (4S), with a full charge voltage of 16.8V, a nominal voltage of 14.8V and an operating current of up to 25A. Its advantage is that it monitors each cell's voltage separately and disconnects the pack when limits are exceeded, which single-point protection cannot do: one weak cell inside a pack can be discharged to damage while the total pack voltage still looks normal.
The listed protections are overcharge at about 4.25V per cell, deep discharge at about 2.5V per cell, and short-circuit and overcurrent. The board comes with balance wires for connecting the middle cell points, and the matching cells are 18650 lithium-ion and similar. It suits 4S packs in bikes, tools and backup power systems.
When installing, connect the balance wires in the correct order from negative to positive, since reversing even one wire can damage the board. The box holds one 4S 25A BMS board with balance wires, without cells. The listing describes it as new with a 1-month warranty.
Suitable for
- 4S battery packs for small bikes and scooters
- Backup power systems
- Cordless hand tools and sprayer pumps
Seller's description
لوحة حماية BMS لحزمة من أربع خلايا ليثيوم أيون على التوالي بفولتية شحن كاملة 16.8V وتيار تشغيل يصل إلى 25A. تراقب فولتية كل خلية على حدة وتفصل الحزمة عند تجاوز الحدود، وهو ما تعجز عنه الحماية المفردة: خلية واحدة ضعيفة داخل الحزمة قد تُفرَّغ حتى التلف بينما تبدو فولتية الحزمة الكلية طبيعية.
أبرز المزايا
- مراقبة فولتية كل خلية من الأربع على حدة
- تيار تشغيل يصل إلى 25A يناسب الأحمال العالية
- حماية من الشحن الزائد والتفريغ العميق والقصر
- فولتية شحن كاملة 16.8V المعيارية لحزم 4S
- أسلاك موازنة لتوصيل نقاط الخلايا الوسطى
الاستخدامات الشائعة
- حزم بطاريات 4S للدراجات والسكوترات الصغيرة
- أنظمة الطاقة الاحتياطية بديلاً عن بطارية 12V
- العدد اليدوية اللاسلكية ومضخات الرش
- مشاريع الطاقة الشمسية الصغيرة
ملاحظة: رتّب توصيل أسلاك الموازنة بالتسلسل الصحيح من السالب إلى الموجب؛ عكس ترتيب سلك واحد يعرّض دائرة المراقبة لفرق جهد مضاعف ويحرق اللوحة فوراً قبل أن تعمل أي حماية.
What's in the box
لوحة حماية BMS واحدة 4S 25A مع أسلاك الموازنة (بدون خلايا)
Specifications
| Cell count | 4 خلايا على التوالي (4S) |
|---|---|
| Operating current | حتى 25A |
| Full charge voltage | 16.8V |
| Nominal voltage | 14.8V |
| Overcharge protection | نحو 4.25V لكل خلية |
| Deep-discharge protection | نحو 2.5V لكل خلية |
| نوع الخلايا | ليثيوم أيون 18650 وما شابهها |
| حماية القصر والتيار الزائد | نعم |
| أسلاك الموازنة | نعم، لنقاط الخلايا الوسطى |
| الاستعمال النموذجي | حزم 4S للدراجات والعدد والطاقة الاحتياطية |
| Category | Automotive, Mobility & Transport Electronics |
| More categories | Battery-management systems |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0760 |




