4S BMS board

لوحة حماية BMS لحزم ليثيوم أيون 4S بجهد 16.8V وتيار 20A | 4S 20A Li-ion BMS Battery Protection Board 14.8V / 16.8V

⁨لوحة حماية BMS لحزم ليثيوم أيون 4S بجهد 16.8V وتيار 20A | 4S 20A Li-ion BMS Battery Protection Board 14.8V / 16.8V⁩ — ⁨5,313 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • 4S layout at 14.8V nominal
  • 16.8V full-charge voltage
  • 20A continuous discharge
  • Monitors each of the 4 cells
  • New, with a 1-month warranty
5,313IQD6,250IQDخصم 15%In stock
1

Ask about stock or request a better price

Price

5,313IQD

Its price has held at 6,250 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

BMS protection board for four 4S Li-ion cells, 14.8V nominal and 16.8V full charge, with discharge current up to 20A.

A BMS protection board for four lithium-ion cells in series, with 14.8V nominal voltage, 16.8V full-charge voltage and discharge current of up to 20A. The board monitors the four cells individually through the balance wires and disconnects the pack on any fault, and the listing calls it the usual choice for building packs that replace a 12V lead-acid battery in pumps, lighting and mobile workshop equipment.

Core values: continuous discharge current 20A, charge cut-off at about 4.2V per cell and discharge cut-off at about 2.5V per cell. The terminals are B-, B1, B2, B3, B+ and P-, with wide copper traces, short-circuit protection with automatic recovery after the load is removed, and independent monitoring of each cell during charging.

Compatible cells named: 18650, 21700 and Li-po at 3.7V; it is not compatible with LiFePO4 cells at 3.2V. The recommended wire is 16AWG or thicker. The charger required is a 16.8V DC charger for 4S packs, so use one made for this kind of pack.

Check the balance-wire order before switching on the load, because any reversal immediately destroys the measuring circuit and cannot be repaired according to the listing. Suggested uses: 14.8V packs for power tools and drills, LED lighting and DC pumps at 12V-16V, portable power boxes and field instruments, and small solar projects with a suitable charge controller. In the box: one 4S, 20A BMS protection board. It is new, with a 1-month warranty.

Suitable for

  • 14.8V packs for power tools and drills
  • LED lighting and DC pumps at 12V-16V
  • Portable power boxes and field instruments

Seller's description

لوحة حماية BMS لأربع خلايا ليثيوم أيون على التوالي، بجهد اسمي 14.8V وجهد شحن كامل 16.8V وتيار تفريغ يصل إلى 20A. تراقب اللوحة الخلايا الأربع كلاً على حدة عبر أسلاك الموازنة وتفصل الحزمة عند أي خلل، وهي الخيار المعتاد لبناء حزم بديلة عن بطارية 12V الرصاصية في المضخات والإنارة وأجهزة الورشة المتنقلة.

أبرز المزايا

  • تيار تفريغ يصل إلى 20A مع مسارات نحاسية عريضة
  • مراقبة الخلايا الأربع عبر نقاط B1 و B2 و B3
  • جهد شحن كامل 16.8V مع فصل عند نحو 4.2V لكل خلية
  • فصل التفريغ عند نحو 2.5V لكل خلية
  • حماية من القِصَر مع استرجاع تلقائي بعد إزالة الحمل
  • لوحة مسطحة يسهل تثبيتها على جانب الحزمة

الاستخدامات الشائعة

  • حزم 14.8V للعدد الكهربائية والمثاقب
  • أنظمة إنارة LED ومضخات DC بجهد 12V–16V
  • صناديق طاقة محمولة وأجهزة قياس ميدانية
  • مشاريع طاقة شمسية صغيرة مع منظم شحن مناسب

ملاحظة: استعمل شاحن 16.8V مخصصاً لحزم 4S، وتأكد من ترتيب أسلاك الموازنة قبل تشغيل الحمل. أي عكس في الترتيب يتلف دائرة القياس فوراً ولا يمكن إصلاحه.

What's in the box

لوحة حماية BMS بترتيب 4S وتيار 20A واحدة

Specifications

Cell count4S بجهد اسمي 14.8V
Full-charge voltage16.8V
Continuous discharge20A
Charge cut-offنحو 4.2V لكل خلية
Discharge cut-offنحو 2.5V لكل خلية
TerminalsB- و B1 و B2 و B3 و B+ و P-
Required chargerشاحن 16.8V DC لحزم 4S
Compatible cells18650 و 21700 و Li-po بجهد 3.7V
Recommended wire16AWG أو أسمك
وظائف الحمايةشحن زائد، تفريغ عميق، تيار زائد، قِصَر
الموازنةمراقبة مستقلة لكل خلية أثناء الشحن
غير متوافقة معخلايا LiFePO4 بجهد 3.2V
CategoryAutomotive, Mobility & Transport Electronics
More categoriesBattery-management systems
ConditionNew
Warranty1-month warranty
SKUNTK-0517

Questions about لوحة حماية BMS لحزم ليثيوم أيون 4S بجهد 16.8V وتيار 20A | 4S 20A Li-ion BMS Battery Protection Board 14.8V / 16.8V

It currently costs 5,313 IQD (was 6,250 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
The listing names a 16.8V DC charger for 4S packs.
Continuous discharge current is 20A, according to the listing.
No, the listing says it is not compatible with LiFePO4 cells at 3.2V.
16AWG or thicker, according to the listing.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.