Battery balancer board
لوحة موازنة لحزم الليثيوم 4S بفولتية 16.8V وتيار موازنة 300mA | 4S 16.8V 18650 and Polymer Lithium Battery Equalizing Balancer Board, 300mA
لوحة موازنة لحزم الليثيوم 4S بفولتية 16.8V وتيار موازنة 300mA | 4S 16.8V 18650 and Polymer Lithium Battery Equalizing Balancer Board, 300mA — 4,038 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- For 4S lithium packs, 16.8V full charge
- 300mA balancing current
- Works with 18650 and polymer cells
- LEDs show the cell being balanced
- Balancing only, not a protection board
Ask about stock or request a better price
Price
4,038IQDIts price has held at 4,750 IQD for the last 11 days.
About this item
Standalone balancer board for 4S lithium packs with 16.8V full charge voltage and 300mA balancing current, for 18650 and polymer cells.
This is a standalone balancer board for lithium packs made of 4 cells in series (4S) with a full charge voltage of 16.8V. It works by discharge balancing: when one cell's voltage rises above the others, the board bleeds the excess through a resistor until the cells are level, and its LEDs show which cell is currently being balanced. The balancing current is 300mA.
It is best used by adding it to an existing pack alongside the protection board, with protection boards that have no balancing, or to improve a pack that has started to drift out of balance. It works with 18650 cells and polymer cells. Note that it only balances and is not a protection board, so it does not replace one.
Discharge balancing is slow by nature, and a badly drifted pack can take days to level out; the faster route is to balance the cells by hand with a single-cell charger first and then let the board maintain the balance. The box holds one 4S balancer board, without cells or a protection board. The listing describes it as new with a 1-month warranty.
Suitable for
- Balancing 4S packs in carts and electric tools
- Improving hand-built battery packs
- Adding balancing to a protection board that has none
Seller's description
لوحة موازنة مستقلة لحزم الليثيوم من أربع خلايا بفولتية شحن كاملة 16.8V وتيار موازنة 300mA. تعمل بمبدأ التفريغ: عندما ترتفع فولتية خلية عن أخواتها تفرّغ اللوحة الفائض عبر مقاومة حتى تتساوى الخلايا. تُستعمل مع لوحات الحماية التي لا تحتوي موازنة، أو لتحسين حزمة قائمة بدأت تفقد توازنها.
أبرز المزايا
- تيار موازنة 300mA أعلى من الموازنة المدمجة في معظم اللوحات
- تعمل مع خلايا 18650 وخلايا البوليمر
- تُضاف إلى حزمة قائمة بلا تغيير لوحة الحماية
- مؤشرات ليد تبيّن الخلية الجاري موازنتها
- حل عملي لإطالة عمر حزمة بدأت تفقد توازنها
الاستخدامات الشائعة
- موازنة حزم 4S في العربات والعدد الكهربائية
- تحسين حزم بطاريات مصنّعة يدوياً
- إضافة موازنة إلى لوحة حماية بلا موازن
- أنظمة الطاقة الاحتياطية والشمسية الصغيرة
ملاحظة: الموازنة بالتفريغ بطيئة بطبيعتها؛ حزمة منحرفة كثيراً قد تحتاج أياماً لتتوازن. الأسرع هو موازنة الخلايا يدوياً بشاحن مفرد أولاً، ثم ترك اللوحة تحافظ على التوازن بعد ذلك.
What's in the box
لوحة موازنة واحدة 4S (بدون خلايا أو لوحة حماية)
Specifications
| Cell count | 4 خلايا على التوالي (4S) |
|---|---|
| Full charge voltage | 16.8V |
| Balancing current | 300mA |
| Working principle | موازنة بالتفريغ عبر مقاومة |
| Cell types | 18650 وخلايا البوليمر |
| المؤشرات | ليدات تبيّن الخلية الجاري موازنتها |
| طريقة التركيب | تُضاف إلى حزمة قائمة مع لوحة الحماية |
| الوظيفة | موازنة فقط (ليست لوحة حماية) |
| سرعة الموازنة | بطيئة بطبيعة المبدأ |
| الاستعمال النموذجي | حزم 4S في العربات والأنظمة الصغيرة |
| Category | Automotive, Mobility & Transport Electronics |
| More categories | Battery-management systems |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0688 |




