Hall effect sensor

حساس هول خطي 49E بعلبة TO-92 ثلاثي الأطراف بخرج تناظري | 49E Linear Hall Effect Sensor TO-92 3-Pin with Ratiometric Analog Output

⁨حساس هول خطي 49E بعلبة TO-92 ثلاثي الأطراف بخرج تناظري | 49E Linear Hall Effect Sensor TO-92 3-Pin with Ratiometric Analog Output⁩ — ⁨1,925 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Ratiometric analog output proportional to field strength and direction
  • Operating voltage about 3V to 6.5V DC
  • Sensitivity about 1.4mV per Gauss
  • 3-pin TO-92 package for through-hole mounting
  • New, with a 1-month warranty
1,925IQD2,750IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

1,925IQD

Its price has held at 2,750 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

49E linear Hall effect sensor with a ratiometric analog output in a TO-92 package that measures magnetic field strength and tells north from south, wired straight to an ADC input.

The 49E is a linear Hall effect magnetic-field sensor that gives an analog output proportional to both the strength and the direction of the field, not just an on/off signal. With no field the output rests near half the supply voltage, then rises or falls depending on which pole approaches, so you can measure field strength and identify the pole together. The output is ratiometric, meaning it changes with the supply voltage.

The operating voltage is about 3V to 6.5V DC, sensitivity is about 1.4mV per Gauss, and the response is bipolar, telling north from south. The pin order is VCC, GND and OUT; the package is a 3-pin TO-92 for through-hole (THT) mounting, the operating temperature range is -40°C to +85°C, and the signal is read straight from a microcontroller ADC input.

The uses named are measuring magnetic field strength and identifying a magnet pole, linear or angular position sensing in levers and handles, non-contact current measurement through the field around a conductor, and educational measurement projects with an analog input on an Arduino.

Usage advice from the listing: the output is affected by supply voltage and shifts slightly with temperature, so use a stable regulated supply and record the output with no magnet as the zero reference in software before measuring. The model is written 49E / SS49E. The part is new according to the listing with a 1-month warranty, and the box contains one 49E sensor.

Suitable for

  • Measuring magnetic field strength and identifying magnet poles
  • Linear or angular position sensing
  • Educational Arduino projects with an analog input

Seller's description

حساس مجال مغناطيسي خطي يعطي خرجاً تناظرياً يتناسب مع شدة المجال واتجاهه، لا مجرد إشارة تشغيل وإطفاء. في غياب المجال يستقر الخرج قرب نصف فولتية التغذية، ثم يرتفع أو ينخفض حسب القطب المقترب، فيمكن قياس شدة المجال وتحديد القطب معاً. هذا يجعله مناسباً للقياس والتحكم لا للكشف فقط.

أبرز المزايا

  • خرج تناظري نسبي Ratiometric يتغير مع فولتية التغذية.
  • قيمة الخرج في غياب المجال تساوي نحو نصف فولتية التغذية.
  • يميّز بين القطب الشمالي والجنوبي عبر اتجاه انحراف الخرج.
  • حساسية نموذجية بحدود 1.4mV لكل Gauss.
  • يعمل ضمن مدى تغذية يقارب 3V إلى 6.5V ويوصل بمدخل ADC مباشرة.
  • حزمة TO-92 صغيرة بثلاثة أطراف بلا أجزاء متحركة.

الاستخدامات الشائعة

  • قياس شدة المجال المغناطيسي وتحديد قطب المغناطيس.
  • حساس موضع خطي أو زاوي في الأذرع والمقابض.
  • قياس التيار غير التلامسي عبر المجال حول الموصل.
  • مشاريع القياس التعليمية مع مدخل تناظري في Arduino.

ملاحظة: الخرج يتأثر بفولتية التغذية وبالحرارة، لذا استخدم تغذية مستقرة ومنظّمة، وسجّل قيمة الخرج عند غياب المغناطيس كنقطة صفر مرجعية في البرنامج قبل بدء القياس.

What's in the box

حساس 49E واحد

Specifications

Model49E / SS49E
PackageTO-92 (3 أطراف)
Operating voltageنحو 3V إلى 6.5V DC
Sensitivityنحو 1.4mV لكل Gauss
Pin orderVCC و GND و OUT
Operating temperature-40°C إلى +85°C
MountingTHT عبر الثقوب
نوع الحساسHall Effect خطي بخرج تناظري
خرج السكوننحو نصف فولتية التغذية بلا مجال
نوع الاستجابةثنائي القطبية يميّز الشمالي والجنوبي
طريقة القراءةمدخل ADC في المتحكم مباشرة
التأثر بالحرارةانزياح طفيف يستوجب معايرة نقطة الصفر
CategorySemiconductors, ICs & Electronic Components
More categoriesSemiconductors
ConditionNew
Warranty1-month warranty
SKUNTK-0180

Questions about حساس هول خطي 49E بعلبة TO-92 ثلاثي الأطراف بخرج تناظري | 49E Linear Hall Effect Sensor TO-92 3-Pin with Ratiometric Analog Output

It currently costs 1,925 IQD (was 2,750 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
No. It gives an analog output proportional to field strength and direction, and it tells the north pole from the south.
The listing says it is read straight from a microcontroller ADC input, with a resting output of about half the supply voltage when there is no field.
The pin order is VCC, GND and OUT, and the operating voltage is about 3V to 6.5V DC, according to the listing.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.