Tantalum capacitor

مكثف تنتالوم SMD بسعة 470µF وفولتية 6.3V حجم D (7343) | 470µF 6.3V SMD Tantalum Capacitor — Case D (7343)

⁨مكثف تنتالوم SMD بسعة 470µF وفولتية 6.3V حجم D (7343) | 470µF 6.3V SMD Tantalum Capacitor — Case D (7343)⁩ — ⁨1,925 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • 470µF with 6.3V working voltage
  • D case, code 7343 (7.3×4.3mm)
  • Solid tantalum with low ESR
  • Temperature range -55°C to +125°C
  • New, with a 1 months warranty
1,925IQD2,750IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

1,925IQD

Its price has held at 2,750 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Solid SMD tantalum capacitor, 470µF 6.3V in a D (7343) case, with low ESR for filtering supply lines.

This is a solid tantalum capacitor for surface mounting, 470µF with a 6.3V working voltage, in a D case with code 7343 (7.3×4.3mm). The tolerance is typically ±20% and the operating range is -55°C to +125°C. It is used for filtering and decoupling supply lines near processors and regulators thanks to its low internal resistance (ESR) and stable capacitance over time.

The capacitor is polarised, and the stripe printed on its body marks the positive terminal (Anode), unlike surface-mount electrolytic capacitors where the marking indicates the negative, so watch the direction closely. The listing also says its capacitance does not degrade with age or dry out as electrolytics do, and that its low profile suits boards with limited clearance.

The listing recommends running it at half its rated voltage or less (derating), which here means practically not above 3.3V, because reversed polarity or excess voltage makes it fail as a short circuit and burn with a small flame on the board. The soldering method stated is reflow, or hot air for hand rework.

The listed uses are filtering supply lines near processors and controllers, an output capacitor for LDO regulators that require low ESR, decoupling the supply in analogue audio circuits and sensors, and repairing phone boards and motherboards by replacing damaged capacitors. The item is new with a 1 months warranty, and the box holds one SMD tantalum capacitor of 470µF 6.3V in a D case.

Suitable for

  • Filtering supply lines near processors
  • Output capacitor for LDO regulators
  • Repairing phone boards and motherboards

Seller's description

مكثف تنتالوم صلب للتركيب السطحي بسعة 470µF وفولتية عمل 6.3V داخل علبة قياس D بالكود 7343. المكثف مستقطب، والشريط المطبوع على جسمه يشير إلى الطرف الموجب (Anode) خلافاً للمكثفات الإلكتروليتية السطحية التي يشير فيها التمييز إلى السالب. يُستعمل لترشيح وعزل خطوط التغذية قرب المعالجات والمنظّمات بفضل مقاومته الداخلية ESR المنخفضة وثبات سعته مع الزمن.

أبرز المزايا

  • سعة 470µF في علبة سطحية صغيرة مقارنة بالمكثفات الإلكتروليتية المكافئة
  • مقاومة داخلية ESR منخفضة تجعله فعّالاً في كبت التموّج السريع
  • السعة لا تتدهور مع العمر ولا تجف كما يحدث في الإلكتروليتية
  • ثبات جيد للسعة عبر مدى الحرارة من -55°C إلى +125°C
  • ارتفاع منخفض يناسب اللوحات ذات الخلوص المحدود
  • مناسب للحام بالفرن (Reflow) وللإعادة اليدوية بمكواة الهواء الساخن

الاستخدامات الشائعة

  • ترشيح خطوط التغذية قرب المعالجات والمتحكمات
  • مكثف خرج لمنظّمات LDO التي تشترط ESR منخفضة
  • عزل التغذية في دوائر الصوت التناظرية والحساسات
  • إصلاح لوحات الهواتف واللوحات الأم واستبدال المكثفات التالفة

ملاحظة: شغّل مكثف التنتالوم عند نصف فولتيته المقنّنة أو أقل، أي لا يتجاوز 3.3V عملياً هنا؛ فعكس القطبية أو تجاوز الفولتية يجعله يفشل بحالة قصر ويحترق بلهب صغير على اللوحة.

What's in the box

مكثف تنتالوم SMD واحد بسعة 470µF وفولتية 6.3V بحجم علبة D.

Specifications

Capacitance470µF
Working voltage6.3V DC
Tolerance±20% (نموذجي)
Case sizeD case / 7343 (7.3×4.3mm)
Dielectric typeتنتالوم صلب (Solid Tantalum)
Operating temperature range-55°C إلى +125°C
القطبيةمستقطب - الشريط يشير إلى الطرف الموجب (Anode)
نوع التركيبSMD (تركيب سطحي)
المقاومة الداخلية ESRمنخفضة مقارنة بالمكثفات الإلكتروليتية
ثبات السعةلا تتدهور مع العمر ولا تجف
الفولتية العملية الموصى بهانصف المقنّنة أو أقل (Derating)
طريقة اللحامReflow أو هواء ساخن للإعادة اليدوية
CategorySemiconductors, ICs & Electronic Components
More categoriesPassive electronic components
ConditionNew
Warranty1-month warranty
SKUNTK-0068

Questions about مكثف تنتالوم SMD بسعة 470µF وفولتية 6.3V حجم D (7343) | 470µF 6.3V SMD Tantalum Capacitor — Case D (7343)

It currently costs 1,925 IQD (was 2,750 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
The stripe printed on the body marks the positive end (Anode), unlike surface-mount electrolytic capacitors.
The listing recommends half the rated voltage or less, which means practically not above 3.3V.
A D case with code 7343, measuring 7.3×4.3mm according to the listing.
By reflow, or with hot air for hand rework, according to the listing.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.