3S BMS board

لوحة حماية BMS لحزم ليثيوم أيون 3S بجهد 12.6V وتيار 20A مع مدخل شحن Type-C | 3S 20A 12.6V Li-ion BMS Board with Type-C Charging Input

⁨لوحة حماية BMS لحزم ليثيوم أيون 3S بجهد 12.6V وتيار 20A مع مدخل شحن Type-C | 3S 20A 12.6V Li-ion BMS Board with Type-C Charging Input⁩ — ⁨4,888 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • 3S layout, 12.6V full charge
  • 20A discharge current
  • Built-in USB Type-C charging input
  • Independent monitoring of the 3 cells
  • New, with a 1-month warranty
4,888IQD5,750IQDخصم 15%In stock
1

Ask about stock or request a better price

Price

4,888IQD

Its price has held at 5,750 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

BMS board for 3S Li-ion packs with 12.6V full-charge voltage and 20A discharge, with a built-in USB Type-C charging input.

A BMS protection board for 3S lithium-ion packs with 12.6V full-charge voltage and 20A current, distinguished by a USB Type-C charging input built onto the board itself. The listing says this input removes the need for a dedicated 12.6V charger and lets you charge the pack from a phone charger or power bank that supports the right step-up, while full protection against overcharge, deep discharge, short circuit and overcurrent stays in place.

Core values: nominal voltage 11.1V, full-charge voltage 12.6V and discharge current 20A, charge cut-off at about 4.2V per cell and discharge cut-off at about 2.5V per cell. The terminals are B-, B1, B2, B+ and P-, and the board monitors the three cells independently during charging, with instantaneous short-circuit protection and automatic recovery.

Compatible cells: 18650, 21700 and Li-po at 3.7V; it is not compatible with LiFePO4 cells at 3.2V. The board is exposed and is mounted with the Type-C port protruding out of the enclosure, so check your enclosure design before ordering.

Charging current through Type-C is much lower than the discharge current, so do not expect fast charging of a large pack, and do not charge and discharge at maximum load at the same time to avoid excess heat. Suggested uses: portable 12V packs charged from a phone charger, speakers and mobile LED lighting, DIY power boxes for routers and cameras, and 12V power tools and workshop equipment. In the box: one 3S, 20A BMS board with a Type-C input. It is new, with a 1-month warranty.

Suitable for

  • Portable 12V packs charged from a phone charger
  • Speakers and mobile LED lighting
  • DIY power boxes for routers and cameras

Seller's description

لوحة حماية BMS لحزم ليثيوم أيون بترتيب 3S وجهد شحن كامل 12.6V وتيار 20A، تتميّز بمدخل شحن Type-C مدمج على اللوحة نفسها. هذا المدخل يغني عن شاحن 12.6V المخصص ويسمح بشحن الحزمة من أي شاحن هاتف أو باور بانك يدعم الرفع المناسب، مع بقاء وظائف الحماية الكاملة من الشحن الزائد والتفريغ العميق والقِصَر وتجاوز التيار.

أبرز المزايا

  • مدخل شحن Type-C مدمج يلغي الحاجة إلى شاحن خاص
  • تيار تفريغ يصل إلى 20A للأحمال المرتفعة
  • جهد شحن كامل 12.6V مع فصل عند نحو 4.2V لكل خلية
  • فصل التفريغ عند نحو 2.5V لكل خلية
  • مراقبة الخلايا الثلاث عبر نقاط الموازنة B1 و B2
  • حماية قِصَر لحظية مع استرجاع تلقائي

الاستخدامات الشائعة

  • حزم 12V محمولة تُشحن من شاحن الهاتف
  • مكبرات صوت وأنظمة إنارة LED متنقلة
  • صناديق طاقة DIY لأجهزة الراوتر والكاميرات
  • عدد كهربائية وأدوات ورشة بجهد 12V

ملاحظة: تيار الشحن عبر Type-C أقل بكثير من تيار التفريغ، فلا تتوقع شحناً سريعاً لحزمة كبيرة، ولا تشحن وتفرّغ بأقصى حمل في الوقت نفسه لتفادي حرارة زائدة.

What's in the box

لوحة حماية BMS بترتيب 3S وتيار 20A بمدخل Type-C واحدة

Specifications

Cell count3S بجهد اسمي 11.1V
Full-charge voltage12.6V
Discharge current20A
Charging inputمنفذ USB Type-C مدمج على اللوحة
Charge cut-offنحو 4.2V لكل خلية
Discharge cut-offنحو 2.5V لكل خلية
TerminalsB- و B1 و B2 و B+ و P-
Compatible cells18650 و 21700 و Li-po بجهد 3.7V
وظائف الحمايةشحن زائد، تفريغ عميق، تيار زائد، قِصَر
الموازنةمراقبة مستقلة لكل خلية أثناء الشحن
طريقة التركيبلوحة مكشوفة تُثبَّت مع بروز منفذ Type-C خارج العلبة
غير متوافقة معخلايا LiFePO4 بجهد 3.2V
CategoryAutomotive, Mobility & Transport Electronics
More categoriesBattery-management systems
ConditionNew
Warranty1-month warranty
SKUNTK-0588

Questions about لوحة حماية BMS لحزم ليثيوم أيون 3S بجهد 12.6V وتيار 20A مع مدخل شحن Type-C | 3S 20A 12.6V Li-ion BMS Board with Type-C Charging Input

It currently costs 4,888 IQD (was 5,750 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
Through the USB Type-C input built onto the board, which the listing says removes the need for a dedicated 12.6V charger.
No, the listing says Type-C charging current is much lower than discharge current, so do not expect fast charging of a large pack.
20A discharge current, according to the listing.
No, the listing says it is not compatible with LiFePO4 cells at 3.2V.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.