Jumper wire spool
سلك توصيل 30AWG بعازل سيليكون لون أحمر بكرة 250 متر | 30AWG Silicone Insulated Jumper Wire, Red, 250m Roll
سلك توصيل 30AWG بعازل سيليكون لون أحمر بكرة 250 متر | 30AWG Silicone Insulated Jumper Wire, Red, 250m Roll — 7,650 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- 30AWG with flexible silicone insulation
- Red, 250m spool
- Tinned multi-strand copper conductor
- About -60°C to +200°C temperature range
- New, with a 1-month warranty
Ask about stock or request a better price
Price
7,650IQDIts price has held at 8,500 IQD for the last 11 days.
About this item
Spool of thin 30AWG silicone-insulated red jumper wire, 250m long, for board trace repair, solder bridges and light power lines.
A spool of thin 30AWG wire with flexible silicone insulation in red, 250m long. Red is usually used to mark positive supply lines in repair work, reducing wiring mistakes during repair. Board repair technicians use it to reconnect broken traces and make bridges between solder points.
The silicone insulation tolerates the iron's heat and does not shrink, and the tinned multi-strand copper conductor takes solder immediately without prep and stays soft after bending. The small outer diameter lets it pass between closely spaced components. Operating temperature runs from about -60°C to +200°C, with insulation voltage up to 300V.
It suits repairing broken traces on phone and computer boards, bridges between solder points and fine chip pins, and low-current signal and supply connections inside devices.
The suitable current is about 0.5A on short connections, so it is for signals and small currents. If you need to carry a higher current, use parallel wires or move to a thicker gauge such as 26AWG, as the listing recommends. The item is new, the box holds one red spool, and the warranty is 1 month.
Suitable for
- Repairing broken traces on phone and computer boards
- Bridges between solder points and chip pins
- Low-current supply and signal connections
Seller's description
بكرة سلك رفيع بقياس 30AWG بعازل سيليكون مرن ولون أحمر يُستخدم عادة لتمييز خطوط التغذية الموجبة في أعمال الصيانة. يعتمده فنيو إصلاح اللوحات لإعادة توصيل المسارات المقطوعة وعمل الجسور بين نقاط اللحام، لأن عازله السيليكوني يتحمل حرارة المكواة ولا ينكمش، والموصل النحاسي المعلّب يقبل القصدير فوراً بلا معالجة.
أبرز المزايا
- اللون الأحمر يميّز خطوط الموجب ويقلل أخطاء التوصيل أثناء الإصلاح
- عازل سيليكون يتحمل حرارة اللحام ولا ينكمش عند ملامسة المكواة
- قطر خارجي صغير يمر بين المكونات المتقاربة على اللوحة
- موصل نحاسي معلّب متعدد الشعيرات يبقى ليّناً بعد الثني
- مدى حرارة تشغيل واسع من نحو -60°C إلى +200°C
الاستخدامات الشائعة
- إصلاح المسارات المقطوعة على لوحات الهواتف والحاسبات
- جسور توصيل بين نقاط اللحام وأطراف الشرائح الدقيقة
- توصيلات إشارة وتغذية منخفضة التيار داخل الأجهزة
ملاحظة: السلك 30AWG مخصص للإشارات والتيارات الصغيرة في حدود نصف أمبير للوصلات القصيرة؛ إذا احتجت تمرير تيار أعلى فاستخدم سلكين متوازيين أو انتقل إلى قياس أسمك مثل 26AWG.
What's in the box
بكرة واحدة من سلك 30AWG بعازل سيليكون لون أحمر بطول 250 متر
Specifications
| Gauge | 30AWG |
|---|---|
| Conductor | نحاس معلّب متعدد الشعيرات |
| Insulation | سيليكون مرن مقاوم للحرارة |
| Color | أحمر |
| Spool length | 250 متر |
| Operating temperature | نحو -60°C إلى +200°C |
| Insulation voltage | حتى 300V |
| Suitable current | نحو 0.5A في الوصلات القصيرة |
| المرونة | عالية جداً ولا يتكسر بالثني المتكرر |
| الاستخدام | إصلاح المسارات وجسور اللحام وخطوط التغذية الخفيفة |
| Category | Semiconductors, ICs & Electronic Components |
| More categories | Electromechanical components & connectors |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0428 |




