Jumper wire spool
سلك توصيل 30AWG بعازل سيليكون لون أسود بكرة 250 متر | 30AWG Silicone Insulated Jumper Wire, Black, 250m Roll
سلك توصيل 30AWG بعازل سيليكون لون أسود بكرة 250 متر | 30AWG Silicone Insulated Jumper Wire, Black, 250m Roll — 7,650 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- 30AWG with flexible silicone insulation
- Black, 250m spool
- Tinned multi-strand copper conductor
- About -60°C to +200°C temperature range
- New, with a 1-month warranty
Ask about stock or request a better price
Price
7,650IQDIts price has held at 8,500 IQD for the last 11 days.
About this item
Spool of thin 30AWG silicone-insulated black jumper wire, 250m long, for board trace repair, solder bridges and signal lines.
A spool of thin 30AWG wire with flexible silicone insulation in black, 250m long. This type of wire is used in board repair workshops to reconnect broken traces and make bridges between solder points. The silicone insulation does not shrink or melt quickly when touched by the iron tip, which is useful in fine work compared with ordinary plastic-insulated wire.
The conductor is tinned multi-strand copper, so it stays soft and does not break under repeated bending, and the small outer diameter lets it pass between closely spaced components on the board. Operating temperature runs from about -60°C to +200°C, with insulation voltage up to 300V.
It suits repairing broken traces on phone and computer boards, bridges between solder points and fine chip pins, and low-current signal connections inside devices and projects. The roll is 250m long and, per the listing, lasts a workshop a long time.
Note: the suitable current is about 0.5A on short connections, so it is meant for signal lines and small currents and should not be used on high-current power lines because it will heat and burn before any protective fuse acts. The item is new, the box holds one black spool, and the warranty is 1 month.
Suitable for
- Repairing broken traces on phone and computer boards
- Bridges between solder points and chip pins
- Low-current signal connections inside devices
Seller's description
بكرة سلك رفيع بقياس 30AWG بعازل سيليكون مرن، وهو السلك المعتمد في ورش صيانة اللوحات الإلكترونية لإعادة توصيل المسارات المقطوعة وعمل الجسور بين نقاط اللحام. العازل السيليكوني لا ينكمش ولا يذوب بسرعة عند ملامسة رأس المكواة، وهذه الميزة تحديداً هي التي تجعله أفضل من الأسلاك ذات العازل البلاستيكي العادي في العمل الدقيق.
أبرز المزايا
- عازل سيليكون يتحمل حرارة اللحام ولا ينكمش عند ملامسة المكواة
- قطر خارجي صغير يمر بين المكونات المتقاربة على اللوحة
- موصل نحاسي معلّب متعدد الشعيرات يبقى ليّناً ولا يتكسر عند الثني
- مدى حرارة تشغيل واسع يمتد من نحو -60°C إلى +200°C
- بكرة 250 متر تكفي ورشة صيانة لفترة طويلة
الاستخدامات الشائعة
- إصلاح المسارات المقطوعة على لوحات الهواتف والحاسبات
- جسور توصيل بين نقاط اللحام وأطراف الشرائح الدقيقة
- توصيلات إشارة منخفضة التيار داخل الأجهزة والمشاريع
ملاحظة: السلك 30AWG مخصص لخطوط الإشارة والتيارات الصغيرة في حدود نصف أمبير للوصلات القصيرة؛ لا تستخدمه في خطوط التغذية عالية التيار لأنه يسخن ويحترق قبل أن يعمل أي فيوز حماية.
What's in the box
بكرة واحدة من سلك 30AWG بعازل سيليكون لون أسود بطول 250 متر
Specifications
| Gauge | 30AWG |
|---|---|
| Conductor | نحاس معلّب متعدد الشعيرات |
| Insulation | سيليكون مرن مقاوم للحرارة |
| Color | أسود |
| Spool length | 250 متر |
| Operating temperature | نحو -60°C إلى +200°C |
| Insulation voltage | حتى 300V |
| Suitable current | نحو 0.5A في الوصلات القصيرة |
| المرونة | عالية جداً ولا يتكسر بالثني المتكرر |
| الاستخدام | إصلاح مسارات اللوحات وجسور اللحام وخطوط الإشارة |
| Category | Semiconductors, ICs & Electronic Components |
| More categories | Electromechanical components & connectors |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0466 |




