Turbo blower fan
مروحة نفخ توربو 3010 فولتية 24V DC قياس 30x30x10mm للطابعات ثلاثية الأبعاد | 3010 Turbo Blower Fan 24V DC 30x30x10mm for 3D Printers
مروحة نفخ توربو 3010 فولتية 24V DC قياس 30x30x10mm للطابعات ثلاثية الأبعاد | 3010 Turbo Blower Fan 24V DC 30x30x10mm for 3D Printers — 3,800 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- Turbo blower fan, 30x30x10mm
- 24V DC operating voltage
- Brushless motor
- Concentrated airflow from a side outlet
- New, with a 1 months warranty
Ask about stock or request a better price
Price
3,800IQDIts price has held at 4,750 IQD for the last 11 days.
About this item
Turbo blower fan measuring 30x30x10mm that runs on 24V DC, designed for part cooling in 3D printers.
This is a turbo-type blower fan (Blower / Centrifugal) measuring 30x30x10mm (size 3010), running on 24V DC. It draws air in at the front and expels it through a concentrated side outlet, which gives higher air pressure and directed flow compared with an axial fan of the same size. The motor is brushless and the body is ABS plastic.
It is used mainly for part cooling in 3D printers, and also for spot cooling of power components and regulators, drawing away soldering fumes and ventilating tight device enclosures. The connection is 2 wires (positive and negative), it mounts with screw holes on the body, and the operating temperature range is roughly -10°C to +70°C. A warning from the listing: do not run a 24V fan on 12V and expect full performance, and do not feed it more than the rated voltage. Aim the airflow at the nozzle, not the hot block. The item is new with a 1 months warranty.
Suitable for
- Part cooling in 3D printers
- Spot cooling of power components and regulators
- Drawing soldering fumes away from the work area
- Directed ventilation inside tight enclosures
Seller's description
مروحة نفخ (Blower) من نوع التوربو بقياس 30x30x10mm تعمل على 24V DC، تسحب الهواء من الوجه وتطرده من فتحة جانبية واحدة بشكل مركّز. هذا الشكل يعطي ضغط هواء أعلى وتدفقاً موجّهاً مقارنة بالمروحة المحورية بنفس القياس، ولذلك تُستخدم أساساً لتبريد الطبقة المطبوعة في الطابعات ثلاثية الأبعاد وأي موضع يحتاج نفخ هواء دقيق على نقطة محددة.
أبرز المزايا
- مخرج هواء جانبي مركّز يوجّه التدفق إلى نقطة محددة
- ضغط هواء ساكن أعلى من المراوح المحورية بنفس الحجم
- تعمل على 24V DC المتوفر مباشرة في معظم لوحات الطابعات ثلاثية الأبعاد
- حجم صغير 30x30x10mm يناسب حوامل مروحة التبريد الجاهزة
- محرك Brushless بعمر تشغيلي طويل وتوصيل بسلكين
الاستخدامات الشائعة
- تبريد الطبقة (Part cooling) في الطابعات ثلاثية الأبعاد
- تبريد نقطي لمكوّنات القدرة والمنظّمات على اللوحات
- سحب أبخرة اللحام بعيداً عن منطقة العمل
- تهوية موجّهة داخل علب الأجهزة الضيقة
ملاحظة: لا تُشغّل مروحة 24V على 12V وتتوقع أداءً كاملاً، ولا تُغذِّها بفولتية أعلى من المقنّنة. ثبّتها على حامل يوجّه الهواء إلى الفوهة وليس إلى البلوك الساخن حتى لا يتأثر ثبات درجة الحرارة.
What's in the box
مروحة نفخ توربو 3010 واحدة بفولتية 24V مع سلكين
Specifications
| Fan type | نفخ توربو (Blower / Centrifugal) |
|---|---|
| Dimensions | 30x30x10mm (مقاس 3010) |
| Operating voltage | 24V DC |
| Motor type | Brushless بدون فرش |
| Wires | 2 (موجب وسالب) |
| Body material | بلاستيك ABS |
| Operating temperature | -10°C إلى +70°C تقريباً |
| مسار الهواء | سحب أمامي وطرد من فتحة جانبية واحدة |
| التثبيت | فتحتا براغي على جسم المروحة |
| ضغط الهواء | أعلى من المروحة المحورية بنفس القياس |
| الاستخدام المصمم له | تبريد الطبقة في الطابعات ثلاثية الأبعاد |
| Category | PC Components & Modding |
| More categories | Cooling systems |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0303 |




