Nickel strip

شريط نيكل 2P بسماكة 0.2mm وطول 1 متر لبطاريات LiFePO4 | 2P Nickel Strip 0.2mm x 1m for LiFePO4 Battery Spot Welding

⁨شريط نيكل 2P بسماكة 0.2mm وطول 1 متر لبطاريات LiFePO4 | 2P Nickel Strip 0.2mm x 1m for LiFePO4 Battery Spot Welding⁩ — ⁨3,500 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • 2P pattern for joining cells in parallel
  • 0.2mm thick, 1m long
  • Suits LiFePO4 and cylindrical lithium cells
  • Spot welding with a higher-power welder
  • New, with a 1 month warranty
3,500IQD5,000IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

3,500IQD

Its price has held at 5,000 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Formed 2P nickel strip, 0.2mm thick and 1m long, for joining cylindrical LiFePO4 cells in parallel by spot welding.

A formed nickel strip in a 2P pattern, 0.2mm thick and 1m long, for joining cylindrical LiFePO4 cells in parallel when building battery packs. According to the listing, the 2P pattern means cells in parallel in each group, and the strip is formed with separating slots that reduce heat transfer between cells during welding.

The 0.2mm thickness is greater than the usual 0.15mm strips, so it carries more current and reduces heat and loss inside the pack, which LiFePO4 packs need as they usually run at high discharge currents. The listing says it suits LiFePO4 cells and cylindrical lithium cells in general, and that the 1m length is enough for a small to medium pack. The material is nickel suitable for spot welding.

Uses named in the listing include building LiFePO4 packs for solar and storage systems, battery packs for electric bicycles and scooters, and rebuilding packs and repairing damaged joints. Before buying, check the cell layout in your design and the strip width that suits your cell diameter, since the listing does not state the strip width.

An important note from the listing: the 0.2mm thickness needs a spot welder with more power than is used with 0.15mm, and if your machine is weak the weld points will be shallow and later separate under vibration or high current. The item is new with a 1 month warranty, and the box contains a roll of 2P nickel strip 0.2mm thick and 1m long.

Suitable for

  • Building LiFePO4 packs for solar and storage systems
  • Battery packs for electric bicycles and scooters
  • Rebuilding packs and repairing damaged joints

Seller's description

شريط نيكل مُشكّل بنمط 2P بسماكة 0.2mm وطول متر واحد، مخصص لربط خلايا LiFePO4 الأسطوانية على التوازي بواقع خليتين في كل مجموعة عند بناء الحزم. السماكة 0.2mm أعلى من الشرائط الاعتيادية 0.15mm فتمرر تياراً أكبر وتقلل الحرارة والفقد داخل الحزمة، وهو ما تحتاجه حزم LiFePO4 التي تعمل عادة بتيارات تفريغ مرتفعة.

أبرز المزايا

  • سماكة 0.2mm تمرر تياراً أعلى من شرائط 0.15mm
  • نمط 2P جاهز يربط كل خليتين على التوازي بشكل منتظم
  • الفتحات بين الوصلات تقلل انتقال الحرارة بين الخلايا أثناء اللحام
  • طول 1 متر يكفي حزمة صغيرة إلى متوسطة
  • مناسب لحزم LiFePO4 وخلايا الليثيوم الأسطوانية عموماً

الاستخدامات الشائعة

  • بناء حزم LiFePO4 لأنظمة الطاقة الشمسية والتخزين
  • حزم بطاريات الدراجات والسكوترات الكهربائية
  • إعادة تجميع الحزم وإصلاح الوصلات التالفة

ملاحظة: السماكة 0.2mm تحتاج جهاز لحام نقطي بطاقة أعلى من المستخدم مع 0.15mm؛ إن كان جهازك ضعيفاً فستكون نقاط اللحام سطحية وتنفصل لاحقاً تحت الاهتزاز أو التيار العالي.

What's in the box

لفة شريط نيكل 2P بسماكة 0.2mm وطول 1 متر

Specifications

Thickness0.2mm
Length1m
Pattern2P (خليتان على التوازي)
Compatible cellsخلايا LiFePO4 وليثيوم أسطوانية
Installation methodلحام نقطي (spot welding)
Materialنيكل قابل للحام النقطي
قدرة تمرير التيارأعلى من شرائط 0.15mm بفضل زيادة السماكة
متطلبات الجهازجهاز لحام نقطي بطاقة أعلى
الشكلشريط مُشكّل بفتحات فاصلة
CategorySemiconductors, ICs & Electronic Components
More categoriesElectromechanical components & connectors
ConditionNew
Warranty1-month warranty
SKUNTK-0223

Questions about شريط نيكل 2P بسماكة 0.2mm وطول 1 متر لبطاريات LiFePO4 | 2P Nickel Strip 0.2mm x 1m for LiFePO4 Battery Spot Welding

It currently costs 3,500 IQD (was 5,000 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
0.2mm thick and 1m long, according to the listing.
A spot welder with more power than is used for 0.15mm strips, since 0.2mm is thicker, according to the listing.
The listing says it suits LiFePO4 cells and cylindrical lithium cells in general.
The listing does not state the strip width, so ask the shop through chat before buying.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.