Alligator clip
مشبك تمساح معدني بطول 28mm للتوصيلات المؤقتة | 28mm Metal Alligator Clip
مشبك تمساح معدني بطول 28mm للتوصيلات المؤقتة | 28mm Metal Alligator Clip — 1,750 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- 28mm length for tight spaces
- Spring jaw with metal teeth
- Open rear end for soldering or crimping
- Sold bare, without a sleeve
- New, sold per piece
Ask about stock or request a better price
Price
1,750IQDIts price has held at 2,500 IQD for the last 11 days.
About this item
Small 28mm metal alligator clip with a toothed spring jaw, suited to short test leads and temporary bench connections.
This is a 28mm metal alligator clip with a toothed spring jaw, made for thin wires, component legs and board terminals where there is no room for a larger clip. The metal teeth grip small terminals and metal sheets, and the conductive metal body gives low contact resistance according to the listing.
The rear end is open, so you can solder the wire into it or fix it by crimping. That makes it a basic part for building short test leads for a multimeter or power supply, for temporary connections while trying circuits on a breadboard, or for holding sensor and coil terminals during inspection. It also suits school and teaching-lab projects.
Note that it is sold bare, without a sleeve, and accepts a separate insulating boot. The metal body is exposed, so fit an insulating boot or heat-shrink tube before using it in a live circuit, because bare clips touching each other cause a direct short. The listing describes the suitable current as low currents for signal and test circuits.
It is smaller than the 45mm and 52mm clips, so choose the length that fits your space. It is sold per piece, and the box contains a 28mm metal alligator clip. The condition is new and the stated warranty is 1 months.
Suitable for
- Building short test leads for a multimeter or power supply
- Temporary connections on a breadboard
- Holding sensor and coil terminals during inspection
- School and teaching-lab projects
Seller's description
مشبك تمساح معدني صغير بطول 28mm بفك نابضي مسنن، مناسب للأسلاك الرفيعة وأرجل المكونات وأطراف اللوحات حيث لا يوجد مجال لمشبك أكبر. الطرف الخلفي مفتوح ليُلحم فيه السلك أو يُثبّت بالكبس، ما يجعله القطعة الأساسية لصناعة أسلاك اختبار قصيرة أو توصيلات مؤقتة على طاولة العمل. يُباع عارياً بدون غلاف، ويمكن تركيب كم عازل عليه.
أبرز المزايا
- طول 28mm مناسب للأماكن الضيقة والأسلاك الرفيعة
- فك نابضي بأسنان معدنية يمسك أرجل المكونات والصفائح
- طرف خلفي مفتوح لللحام أو الكبس على السلك
- جسم معدني موصل بالكامل بمقاومة تماس منخفضة
- كلفة منخفضة تسمح باستخدامه بكميات في المشاريع
الاستخدامات الشائعة
- تصنيع أسلاك اختبار قصيرة للأفوميتر ومزود الطاقة
- توصيلات مؤقتة أثناء تجربة الدوائر على لوحة التجارب
- تثبيت أطراف الحساسات والملفات أثناء الفحص
- مشاريع المدارس والمختبرات التعليمية
ملاحظة: بما أن الجسم معدني مكشوف، ركّب كماً عازلاً أو أنبوباً حرارياً على المشبك قبل استخدامه في دائرة حية، فملامسة مشبكين عاريين لبعضهما تسبب قصراً مباشراً.
What's in the box
مشبك تمساح معدني واحد بطول 28mm
Specifications
| Length | 28mm |
|---|---|
| Material | معدن مطلي بفك نابضي |
| Jaw type | مسنن نابضي للأسلاك والأطراف الرفيعة |
| Connection method | لحام أو كبس السلك في الطرف الخلفي |
| Insulation | بدون غلاف؛ يقبل كماً عازلاً منفصلاً |
| الاستخدام الأساسي | أسلاك اختبار وتوصيلات مؤقتة |
| مجال الإمساك | أسلاك رفيعة وأرجل مكونات وصفائح معدنية |
| التيار المناسب | تيارات منخفضة تناسب دوائر الإشارة والاختبار |
| الحجم مقارنة بالبدائل | أصغر من مشابك 45mm و52mm |
| البيع | قطعة واحدة |
| Category | Semiconductors, ICs & Electronic Components |
| More categories | Electromechanical components & connectors |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0232 |




