JST connector cable
كيبل موصل JST PH2.0 بطرفين ذكر وأنثى خطوة 2.0mm بطول 200mm ومقطع 26AWG | 2-Pin JST PH2.0 Male and Female Connector Cable, 2.0mm Pitch, 200mm 26AWG
كيبل موصل JST PH2.0 بطرفين ذكر وأنثى خطوة 2.0mm بطول 200mm ومقطع 26AWG | 2-Pin JST PH2.0 Male and Female Connector Cable, 2.0mm Pitch, 200mm 26AWG — 1,925 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- JST PH2.0 2-pin male and female cable
- 2.0mm pitch
- 200mm 26AWG wire each side
- Pre-fitted wires, no crimping tool needed
- New, with a 1 months warranty
Ask about stock or request a better price
Price
1,925IQDIts price has held at 2,750 IQD for the last 11 days.
About this item
JST PH2.0 2-pin cable with male and female plugs, 2.0mm pitch and 200mm 26AWG wires, ready to use without a crimping tool.
This is a connector cable from the JST PH2.0 series with 2 pins (2 Pin), including a male plug and a female plug, with a 2.0mm pin pitch. Each side is pre-fitted on a 200mm wire of 26AWG, giving you a detachable link between two boards or between a battery and a circuit without needing a crimping tool.
The contacts and wires are already fitted inside the housing, and the keyed housing with a side lock prevents reverse insertion and vibration disconnects. The two wires are different colors to tell positive from negative. According to the listing, this pitch is used in most small batteries and sensor modules, and the 200mm length is enough to run inside enclosures and robotics projects.
The uses listed are connecting small LiPo and Li-ion batteries to circuits, sensor and LED module links on development boards, small cooling fans, and prototypes that need repeated disconnecting and reconnecting.
Important note: confirm the positive and negative order on both sides before connecting, since wire colors differ between suppliers, and do not load the wire with high current because 26AWG is meant for signals and light loads. The product is new, the box holds one set, with a 1 months warranty.
Suitable for
- Connecting small LiPo and Li-ion batteries to circuits
- Sensor and LED module links on development boards
- Small cooling fans inside enclosures
- Prototypes that need repeated disconnecting
Seller's description
كيبل توصيل بطرفين من سلسلة JST PH2.0 يضم قابسًا ذكرًا وقابسًا أنثى، خطوة الأطراف 2.0mm وكل جانب مركّب مسبقًا على سلك بطول 200mm ومقطع 26AWG. يوفّر وصلة قابلة للفصل بين لوحتين أو بين بطارية ودائرة دون شراء عدة كبس، وشكل الحاضنة المشقوف مع القفل الجانبي يمنع التركيب بالمقلوب أو الانفصال بالاهتزاز.
أبرز المزايا
- خطوة 2.0mm القياسية المستخدمة في أغلب البطاريات الصغيرة ووحدات الحساسات
- طول 200mm لكل جانب يكفي للتمديد داخل العلب ومشاريع الروبوتات
- مقطع 26AWG مرن وسهل التوجيه في المساحات الضيقة
- أسلاك ملحومة ومركّبة مسبقًا داخل التماسات — جاهز للاستعمال
- قفل جانبي وحاضنة مشقوفة ضد الانفصال وعكس القطبية
- لونان مختلفان للسلكين يسهّلان تمييز الموجب من السالب
الاستخدامات الشائعة
- توصيل بطاريات LiPo و Li-ion الصغيرة بالدوائر
- وصلات الحساسات ووحدات LED على لوحات التطوير
- مراوح التبريد الصغيرة داخل العلب
- النماذج الأولية التي تحتاج فصلًا وتوصيلًا متكررًا
ملاحظة: تأكد من تطابق ترتيب الموجب والسالب بين الجانبين قبل التوصيل لأن ألوان الأسلاك تختلف بين الموردين، ولا تحمّل السلك تيارًا كبيرًا لأن 26AWG مخصص للإشارة والأحمال الخفيفة.
What's in the box
طقم واحد: موصل JST PH2.0 ذكر وأنثى بطرفين مع أسلاك 200mm
Specifications
| Series | JST PH2.0 |
|---|---|
| Pitch | 2.0mm |
| Number of pins | 2 Pin |
| Wire length | 200mm لكل جانب |
| Wire gauge | 26AWG |
| المحتوى | قابس ذكر + قابس أنثى بأسلاك مركّبة مسبقًا |
| نوع القفل | قفل جانبي وحاضنة مشقوفة |
| تمييز الأسلاك | لونان مختلفان للموجب والسالب |
| الحاجة إلى عدة كبس | لا |
| التيار المناسب | إشارات وأحمال خفيفة |
| الاستخدام | بطاريات صغيرة وحساسات ومراوح ولوحات تطوير |
| Category | Semiconductors, ICs & Electronic Components |
| More categories | Electromechanical components & connectors |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0291 |




