Single-cell BMS board

لوحة حماية BMS لخلية ليثيوم أيون 1S بجهد 3.7V وتيار 7.5A بـ4 MOSFET | 1S 7.5A 3.7V Li-ion 4 MOSFET BMS Protection Board for 18650

⁨لوحة حماية BMS لخلية ليثيوم أيون 1S بجهد 3.7V وتيار 7.5A بـ4 MOSFET | 1S 7.5A 3.7V Li-ion 4 MOSFET BMS Protection Board for 18650⁩ — ⁨2,763 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • For one 1S Li-ion cell at 3.7V
  • 7.5A continuous discharge
  • Four MOSFET transistors
  • Short-circuit and overcurrent protection
  • New, with a 1-month warranty
2,763IQD3,250IQDخصم 15%In stock
1

Ask about stock or request a better price

Price

2,763IQD

Its price has held at 3,250 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

BMS protection board for a single 1S Li-ion cell at 3.7V and 7.5A, built with 4 MOSFETs, for 18650 and other cells.

A protection board for a single lithium-ion cell (1S) at 3.7V and 7.5A, built on four MOSFET transistors that share the current, which lowers overall resistance and raises the load it can take. It protects against overcharge, deep discharge, short circuit and overcurrent, and suits applications that draw relatively high loads from one cell such as small motors, portable vacuum cleaners and cordless work tools.

Core values: continuous discharge current 7.5A, charge cut-off at about 4.25V per cell and discharge cut-off at about 2.5V per cell. According to the listing, the 4 MOSFETs give a smaller voltage drop under load, and the board recovers automatically after the load is removed following a short circuit. It needs no external supply, setup or programming before use.

Compatible cells named: 18650, 21700 and Li-po at 3.7V; it is not compatible with LiFePO4 cells at 3.2V. The terminals are B+ / B- / P- with solder pads, installation is by direct soldering inside the battery pack, and the slim design lets it be wrapped with the cell inside a heat-shrink sleeve.

At currents near 7.5A use nickel strip or wire of at least 18AWG, and do not leave the board touching the hot cell body, to avoid drift in the protection thresholds. Also make sure the cell itself can handle the continuous discharge you need. In the box: one 1S, 7.5A BMS protection board. It is new, with a 1-month warranty.

Suitable for

  • Portable vacuums and blowers on one 18650 cell
  • Small cordless drills and screwdrivers
  • DC fans and pumps with high start-up current

Seller's description

لوحة حماية لخلية ليثيوم أيون واحدة بجهد 3.7V وتيار 7.5A، مبنية على أربعة ترانزستورات MOSFET تتقاسم التيار فتقل المقاومة الكلية وترتفع قدرة التحمّل. توفّر حماية كاملة من الشحن الزائد والتفريغ العميق والقِصَر وتجاوز التيار، وتناسب التطبيقات التي تسحب أحمالاً مرتفعة نسبياً من خلية واحدة مثل المحركات الصغيرة والمكانس المحمولة وأدوات العمل اللاسلكية.

أبرز المزايا

  • أربعة MOSFET ترفع التيار المستمر إلى 7.5A
  • هبوط فولتية أقل تحت الحمل بفضل انخفاض مقاومة القناة
  • فصل الشحن عند نحو 4.25V وفصل التفريغ عند نحو 2.5V
  • حماية من القِصَر مع استرجاع تلقائي بعد رفع الحمل
  • تصميم نحيف يسمح بلفّها مع الخلية داخل غلاف حراري
  • لا تحتاج تغذية خارجية أو ضبط قبل التشغيل

الاستخدامات الشائعة

  • مكانس ومنافيخ محمولة تعمل بخلية 18650 واحدة
  • مفكات ومثاقب لاسلكية صغيرة
  • مراوح ومضخات DC بتيار بدء مرتفع
  • حزم خلية واحدة في الروبوتات التعليمية

ملاحظة: عند التيارات القريبة من 7.5A استعمل شريط نيكل أو سلكاً بمقطع 18AWG على الأقل، ولا تُبقِ اللوحة ملاصقة لجسم الخلية الساخن لتفادي انحراف عتبات الحماية.

What's in the box

لوحة حماية BMS بترتيب 1S وتيار 7.5A واحدة

Specifications

Cell count1S خلية واحدة بجهد 3.7V
Continuous discharge7.5A
MOSFET count4
Charge cut-offنحو 4.25V لكل خلية
Discharge cut-offنحو 2.5V لكل خلية
Compatible cells18650 و 21700 و Li-po بجهد 3.7V
TerminalsB+ / B- / P- بمساحات لحام
Recommended wire18AWG أو شريط نيكل مكافئ
عدد ترانزستورات MOSFET4
وظائف الحمايةشحن زائد، تفريغ عميق، تيار زائد، قِصَر
الاسترجاع بعد الحمايةتلقائي عند إزالة الحمل
طريقة التركيبلحام مباشر داخل حزمة البطارية
غير متوافقة معخلايا LiFePO4 بجهد 3.2V
CategoryAutomotive, Mobility & Transport Electronics
More categoriesBattery-management systems
ConditionNew
Warranty1-month warranty
SKUNTK-0334

Questions about لوحة حماية BMS لخلية ليثيوم أيون 1S بجهد 3.7V وتيار 7.5A بـ4 MOSFET | 1S 7.5A 3.7V Li-ion 4 MOSFET BMS Protection Board for 18650

It currently costs 2,763 IQD (was 3,250 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
No, the listing says it is not compatible with LiFePO4 cells at 3.2V.
Continuous discharge current is 7.5A, according to the listing.
No, it needs no external supply, setup or programming before use, according to the listing.
By direct soldering inside the battery pack on the B+, B- and P- terminals.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.