Single-cell BMS board

لوحة حماية BMS لخلية ليثيوم أيون 1S بجهد 3.7V وتيار 2A | 1S 3.7V 2A Li-ion BMS Battery Protection Board

⁨لوحة حماية BMS لخلية ليثيوم أيون 1S بجهد 3.7V وتيار 2A | 1S 3.7V 2A Li-ion BMS Battery Protection Board⁩ — ⁨2,338 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • For one 1S Li-ion cell at 3.7V
  • 2A continuous working current
  • Charge cut-off at about 4.25V
  • Discharge cut-off at about 2.5V
  • New, with a 1-month warranty
2,338IQD2,750IQDخصم 15%In stock
1

Ask about stock or request a better price

Price

2,338IQD

Its price has held at 2,750 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Small BMS protection board for a single 1S Li-ion cell at 3.7V with 2A working current, for low-drain devices.

A small protection board for a single lithium-ion cell at 3.7V with 2A working current, which the listing calls the usual choice for low-drain devices running on a flat cell or an 18650. The circuit stops charging when the cell reaches its upper limit and disconnects the load when voltage falls to the deep-discharge limit, and it also protects against short circuits and overcurrent.

Core values: 2A continuous working current, charge cut-off at about 4.25V per cell, discharge cut-off at about 2.5V per cell, and very low quiescent consumption at the microamp level, which reduces cell drain during storage. The board recovers automatically when the load is disconnected after a short circuit.

Supported cells are Li-ion and Li-po at 3.7V; it is not compatible with LiFePO4 cells at 3.2V. The terminals B+ / B- / P- are on the face of the board, it is installed by direct soldering to the cell terminals, and its very small size suits tight enclosures. Balancing is not needed in a 1S build.

The board is limited to 2A only, so do not use it with motors or speakers that draw more current, or the protection will keep cutting out or the circuit will heat up. Suggested uses: children's toys and single-cell remote controls, wireless sensors and low-drain IoT projects, and small LED torches and emergency lamps. In the box: one 1S, 2A protection board. It is new, with a 1-month warranty.

Suitable for

  • Children's toys and remote controls
  • Wireless sensors and IoT projects
  • Small LED torches and emergency lamps

Seller's description

لوحة حماية صغيرة لخلية ليثيوم أيون واحدة بجهد 3.7V وتيار عمل 2A، وهي الخيار المعتاد للأجهزة منخفضة الاستهلاك التي تعمل بخلية مسطحة أو 18650. تقطع الدائرة الشحن عند بلوغ الخلية حدّها الأعلى وتفصل الحمل عند هبوط الفولتية إلى حد التفريغ العميق، كما تحمي من القِصَر ومن تجاوز التيار. حجمها الصغير يسمح بإخفائها داخل أي علبة جهاز.

أبرز المزايا

  • تيار عمل مستمر 2A يكفي وحدات التحكم وأجهزة الاستشعار
  • فصل الشحن عند نحو 4.25V لكل خلية لمنع الانتفاخ
  • فصل التفريغ عند نحو 2.5V للحفاظ على عمر الخلية
  • حماية من القِصَر مع استرجاع تلقائي عند فصل الحمل
  • استهلاك ذاتي منخفض جداً يقلل تفريغ الخلية أثناء التخزين
  • لوحة نحيفة تُلحم مباشرة على أقطاب الخلية

الاستخدامات الشائعة

  • ألعاب الأطفال وأجهزة التحكم عن بُعد بخلية واحدة
  • حساسات لاسلكية ومشاريع IoT منخفضة الاستهلاك
  • كشافات LED صغيرة ومصابيح الطوارئ
  • إعادة تأهيل بطاريات الأجهزة الصغيرة التالفة

ملاحظة: اللوحة محدودة بتيار 2A فقط، فلا تستعملها مع محركات أو مكبرات صوت تسحب تياراً أعلى وإلا انقطعت الحماية باستمرار أو سخنت الدائرة.

What's in the box

لوحة حماية BMS بترتيب 1S وتيار 2A واحدة

Specifications

Cell count1S خلية واحدة بجهد 3.7V
Working current2A مستمر
Charge cut-offنحو 4.25V لكل خلية
Discharge cut-offنحو 2.5V لكل خلية
Cell typesLi-ion و Li-po بجهد 3.7V
TerminalsB+ / B- / P- على وجه اللوحة
Installationلحام مباشر على أقطاب الخلية
وظائف الحمايةشحن زائد، تفريغ عميق، تيار زائد، قِصَر
استهلاك التيار الساكنمنخفض جداً بمستوى الميكرو أمبير
حجم اللوحةصغير جداً يناسب العلب الضيقة
الموازنةغير مطلوبة في التركيب 1S
غير متوافقة معخلايا LiFePO4 بجهد 3.2V
CategoryAutomotive, Mobility & Transport Electronics
More categoriesBattery-management systems
ConditionNew
Warranty1-month warranty
SKUNTK-0213

Questions about لوحة حماية BMS لخلية ليثيوم أيون 1S بجهد 3.7V وتيار 2A | 1S 3.7V 2A Li-ion BMS Battery Protection Board

It currently costs 2,338 IQD (was 2,750 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
The board is limited to 2A, and the listing warns against using it with motors or speakers that draw more current.
No, the listing says it is not compatible with LiFePO4 cells at 3.2V.
No, balancing is not needed in a 1S build, according to the listing.
By direct soldering to the cell terminals; its B+ / B- / P- terminals are on the face of the board.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.