Battery protection board
لوحة حماية BMS لخلية ليثيوم واحدة 3.7V بتيار 2A لخلايا 18650 | 1S 3.7V 2A BMS Li-ion Battery Protection Board for 18650 Cells
لوحة حماية BMS لخلية ليثيوم واحدة 3.7V بتيار 2A لخلايا 18650 | 1S 3.7V 2A BMS Li-ion Battery Protection Board for 18650 Cells — 2,338 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- For a single 3.7V Li-ion cell
- Operating current up to 2A
- Very small, sticks on the cell body
- Overcharge, deep-discharge and short protection
- Low standby self-consumption
Ask about stock or request a better price
Price
2,338IQDIts price has held at 2,750 IQD for the last 11 days.
About this item
Small BMS protection board for a single 3.7V Li-ion cell with a 2A operating current, stuck on the body of an 18650 cell.
A very small BMS protection board for a single Li-ion cell (1S) at 3.7V with an operating current of up to 2A. It protects against overcharge at about 4.25V, deep discharge at about 2.5V and short-circuit. Its small size lets you stick it directly on the cell body inside a device, and its self-consumption is very low in standby.
The suitable cells according to the listing are 18650 and single cells in general, and the board type is BMS/PCM. It suits small projects, flashlights, portable devices, small hand-made power banks, and Arduino and ESP32 projects running on a battery.
Do not exceed 2A continuous, because exceeding the current trips the protection and can damage the MOSFET if repeated. If the board cuts off due to deep discharge, connecting the charger usually reactivates it after a moment. The listing describes it as new, and the box holds one 1S 2A board without cells, with a 1-month warranty.
Suitable for
- Protecting an 18650 cell in small projects
- Flashlights and portable devices on a single cell
- Arduino and ESP32 projects running on battery
Seller's description
لوحة حماية صغيرة جداً لخلية ليثيوم أيون واحدة بفولتية 3.7V وتيار تشغيل 2A، تحمي من الشحن الزائد والتفريغ العميق والقصر. حجمها الصغير يسمح بلصقها مباشرة على جسم الخلية داخل الجهاز، وهي الحل الاقتصادي لحماية أي مشروع صغير يعمل على خلية 18650 مفردة.
أبرز المزايا
- حجم صغير جداً يُلصق مباشرة على جسم الخلية
- حماية كاملة: شحن زائد، تفريغ عميق، قصر
- تيار 2A يكفي معظم المشاريع الصغيرة
- سعر منخفض يجعل حماية كل خلية أمراً عملياً
- استهلاك ذاتي منخفض جداً في وضع السكون
الاستخدامات الشائعة
- حماية خلية 18650 في المشاريع الصغيرة
- مصابيح وأجهزة محمولة تعمل على خلية واحدة
- بنوك الطاقة الصغيرة يدوية الصنع
- مشاريع Arduino و ESP32 العاملة على بطارية
ملاحظة: لا تتجاوز 2A مستمر؛ تجاوز التيار يفصل الحماية وقد يتلف الموسفيت مع التكرار. وإذا فصلت اللوحة بسبب التفريغ العميق، فإن توصيل الشاحن غالباً يعيد تفعيلها تلقائياً بعد لحظات.
What's in the box
لوحة حماية BMS واحدة 1S 2A (بدون خلايا)
Specifications
| Cell count | خلية واحدة (1S) |
|---|---|
| Operating current | حتى 2A |
| Cell voltage | 3.7V اسمياً (ليثيوم أيون) |
| Overcharge protection | نحو 4.25V |
| Deep-discharge protection | نحو 2.5V |
| Suitable cells | 18650 والخلايا المفردة عموماً |
| حماية القصر | نعم |
| الحجم | صغير جداً يُلصق على جسم الخلية |
| الاستهلاك الذاتي | منخفض جداً في وضع السكون |
| نوع اللوحة | لوحة حماية BMS/PCM |
| Category | Automotive, Mobility & Transport Electronics |
| More categories | Battery-management systems |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0821 |




