Battery protection board
لوحة حماية BMS لخلية ليثيوم واحدة بتيار 20A | 1S 20A BMS Lithium Battery Protection Circuit Board
لوحة حماية BMS لخلية ليثيوم واحدة بتيار 20A | 1S 20A BMS Lithium Battery Protection Circuit Board — 3,613 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- For a single Li-ion cell (1S)
- Operating current up to 20A
- Overcharge protection at about 4.25V
- Deep-discharge protection at about 2.5V
- Overcurrent protection with auto recovery
Ask about stock or request a better price
Price
3,613IQDIts price has held at 4,250 IQD for the last 11 days.
About this item
BMS protection board for a single Li-ion cell (1S) with an operating current of up to 20A, protecting against overcharge, deep discharge, overcurrent and short-circuit.
This is a BMS protection board for a single Li-ion cell (1S) with an operating current of up to 20A. It protects the cell from overcharge at about 4.25V, deep discharge at about 2.5V, overcurrent with automatic recovery, and short-circuit. The cell voltage is listed as 3.7V nominal, and the board type is BMS/PCM.
20A is fairly high for one cell, so it suits applications that draw heavy current from a single cell. The typical use listed is single 18650 and 21700 cells. The board protects the cell but does not charge it, so you need a suitable lithium charger with a 4.2V cut-off. At 20A the wires heat up, so the listing recommends 14AWG or thicker.
The listing describes the product as new, and the box holds one 1S 20A protection board without cells or wires, with a 1-month warranty. Since wires are not included, prepare suitable wire before installing.
Suitable for
- Protecting a single 18650 or 21700 cell
- Portable speakers and powerful flashlights
- Small hand tools running on a single cell
Seller's description
لوحة حماية BMS لخلية ليثيوم أيون واحدة بتيار تشغيل يصل إلى 20A، تحمي الخلية من الشحن الزائد والتفريغ العميق والتيار الزائد والقصر. تيار 20A عالٍ نسبياً لخلية واحدة، ولهذا تناسب التطبيقات التي تسحب تياراً كبيراً من خلية واحدة مثل العدد اليدوية الصغيرة ومكبرات الصوت المحمولة.
أبرز المزايا
- تيار تشغيل مستمر يصل إلى 20A من خلية واحدة
- حماية من الشحن الزائد فوق 4.25V تقريباً
- حماية من التفريغ العميق تحت 2.5V تقريباً
- حماية من التيار الزائد والقصر مع استرجاع تلقائي
- حجم صغير يسهّل تركيبها داخل حزمة البطارية
الاستخدامات الشائعة
- حماية خلية 18650 أو 21700 مفردة
- مكبرات الصوت المحمولة والمصابيح القوية
- العدد اليدوية الصغيرة العاملة على خلية واحدة
- مشاريع الطاقة المحمولة التي تسحب تياراً عالياً
ملاحظة: اللوحة تحمي الخلية لكنها لا تشحنها؛ تحتاج شاحن ليثيوم مناسب بجهد قطع 4.2V. وتذكّر أن تيار 20A من خلية واحدة يسخّن الأسلاك، فاستعمل مقطعاً كافياً لا يقل عن 14AWG.
What's in the box
لوحة حماية BMS واحدة 1S 20A (بدون خلايا أو أسلاك)
Specifications
| Cell count | خلية واحدة (1S) |
|---|---|
| Operating current | حتى 20A |
| Cell voltage | 3.7V اسمياً (ليثيوم أيون) |
| Overcharge protection | نحو 4.25V |
| Deep-discharge protection | نحو 2.5V |
| Recommended wire size | 14AWG أو أسمك عند 20A |
| حماية التيار الزائد | نعم، مع استرجاع تلقائي |
| حماية القصر | نعم |
| نوع اللوحة | لوحة حماية BMS/PCM |
| الاستعمال النموذجي | خلايا 18650 و 21700 المفردة |
| Category | Automotive, Mobility & Transport Electronics |
| More categories | Battery-management systems |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0858 |




