16S BMS board

لوحة حماية BMS لحزم ليثيوم 16S بجهد 60V وتيار 30A وذروة 50A مع موازنة | 16S 60V 30A BMS Lithium Battery Protection Board with Balancer, 50A Peak

⁨لوحة حماية BMS لحزم ليثيوم 16S بجهد 60V وتيار 30A وذروة 50A مع موازنة | 16S 60V 30A BMS Lithium Battery Protection Board with Balancer, 50A Peak⁩ — ⁨24,250 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • 16S layout at 60V nominal
  • 30A continuous, 50A peak
  • Built-in balancing circuit
  • 17-wire balance cable
  • New, with a 1-month warranty
24,250IQDIn stock
1

Ask about stock or request a better price

Price

24,250IQD

Its price has held at 24,250 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

BMS protection board for 16S lithium packs at 60V with 30A continuous and 50A peak current, a balancing circuit and a 17-wire balance cable.

A BMS protection board for 16S lithium packs, meaning 60V nominal, with 30A continuous current and up to 50A peak, equipped with a balancing circuit that equalizes cell voltages during charging. The board monitors each cell individually and disconnects the pack on overcharge, deep discharge, overcurrent or short circuit. The listing says its current rating and cell count make it the usual choice for 60V electric bike packs.

Core values: continuous current 30A, peak current up to 50A for a short time, full-charge voltage 67.2V for a 16S pack, charge cut-off at about 4.2V per cell and discharge cut-off at about 2.5V per cell. Do not treat the 50A peak as a permanent operating current, because heat will raise MOSFET resistance and shorten the board's life.

The terminals are B-, P- and C- with a 17-wire balance cable, and the compatible cells are Li-ion and Li-po at 3.7V. The recommended wire for the discharge path is 12AWG or thicker, and the wide copper traces handle motor current according to the listing.

The board is exposed and needs mounting on a heat-dissipating surface, so fix it to a metal surface or heat sink inside the battery box. Suggested uses: 60V electric bike and scooter packs, small transport carts and BLDC motors, medium-sized energy-storage systems, and mobile workshop equipment. In the box: one 16S, 30A BMS board with a balance cable. It is new, with a 1-month warranty.

Suitable for

  • 60V electric bike and scooter packs
  • Small transport carts and BLDC motors
  • Medium-sized energy-storage systems

Seller's description

لوحة حماية BMS لحزم ليثيوم بترتيب 16S أي 60V اسمية، بتيار مستمر 30A وذروة تصل إلى 50A، ومزوّدة بدائرة موازنة تعادل فولتيات الخلايا أثناء الشحن. تراقب اللوحة كل خلية على حدة وتفصل الحزمة عند الشحن الزائد أو التفريغ العميق أو تجاوز التيار أو القِصَر. مقاس التيار وعدد الخلايا يجعلانها الخيار المعتاد لحزم الدراجات الكهربائية بجهد 60V.

أبرز المزايا

  • ترتيب 16S يغطي حزم 60V من خلايا 3.7V
  • تيار مستمر 30A وذروة قصيرة حتى 50A
  • دائرة موازنة تقلل فارق الفولتية بين الخلايا في كل دورة شحن
  • مراقبة مستقلة لكل خلية عبر كيبل موازنة كامل
  • حماية من القِصَر مع فصل فوري لمسار التفريغ
  • مسارات نحاسية عريضة تتحمّل تيار المحرّك

الاستخدامات الشائعة

  • حزم الدراجات والسكوتر الكهربائي بجهد 60V
  • عربات نقل صغيرة ومحركات BLDC
  • أنظمة تخزين طاقة متوسطة الحجم
  • حزم مخصصة لمعدات الورش المتنقلة

ملاحظة: ثبّت اللوحة على سطح معدني أو مشتت حراري داخل صندوق البطارية، ولا تعتمد على تيار الذروة 50A كتيار تشغيل دائم لأن الحرارة سترفع مقاومة الـMOSFET وتقصّر عمر اللوحة.

What's in the box

لوحة حماية BMS بترتيب 16S وتيار 30A واحدة مع كيبل الموازنة

Specifications

Cell count16S بجهد اسمي 60V
Continuous current30A
Peak currentحتى 50A لفترة قصيرة
Balancingدائرة موازنة مدمجة تعمل أثناء الشحن
Charge cut-offنحو 4.2V لكل خلية
Discharge cut-offنحو 2.5V لكل خلية
TerminalsB- و P- و C- مع كيبل موازنة 17 سلكاً
Compatible cellsLi-ion و Li-po بجهد 3.7V
Full-charge voltage67.2V لحزمة 16S
وظائف الحمايةشحن زائد، تفريغ عميق، تيار زائد، قِصَر
مقطع السلك الموصى به12AWG أو أسمك لمسار التفريغ
التركيبلوحة مكشوفة تحتاج تثبيتاً على سطح مصرّف للحرارة
CategoryAutomotive, Mobility & Transport Electronics
More categoriesBattery-management systems
ConditionNew
Warranty1-month warranty
SKUNTK-0373

Questions about لوحة حماية BMS لحزم ليثيوم 16S بجهد 60V وتيار 30A وذروة 50A مع موازنة | 16S 60V 30A BMS Lithium Battery Protection Board with Balancer, 50A Peak

It currently costs 24,250 IQD from Nanotik on SinaaStore (updated 16 November 2026).
30A continuous and up to 50A peak for a short time, according to the listing.
Yes, a built-in balancing circuit that works during charging, according to the listing.
67.2V for a 16S pack, according to the listing.
12AWG or thicker for the discharge path, according to the listing.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.