BMS protection board

لوحة حماية BMS لبطاريات ليثيوم أيون 13S بجهد 48V وتيار 60A مع موازنة | 13S 48V 60A Li-ion BMS Protection Board with Balancer, Split Port

⁨لوحة حماية BMS لبطاريات ليثيوم أيون 13S بجهد 48V وتيار 60A مع موازنة | 13S 48V 60A Li-ion BMS Protection Board with Balancer, Split Port⁩ — ⁨19,500 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • 13S layout at 48V nominal
  • 60A maximum, 40A continuous
  • Separate charge and discharge ports
  • Thermal cut-off at 75°C
  • New, with a 1-month warranty
19,500IQDIn stock
1

Ask about stock or request a better price

Price

19,500IQD

Its price has held at 19,500 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

BMS protection board for 13S Li-ion packs at 48V with 60A maximum current, separate charge and discharge ports and thermal cut-off at 75°C.

This is a BMS protection board for 13S lithium-ion packs, meaning 48V nominal from 3.7V cells. It handles a maximum current of 60A and has separate charge and discharge ports of the split port type. The circuit monitors each cell's voltage and disconnects the pack on overcharge, deep discharge or short circuit, and it includes a temperature sensor that cuts discharge at 75°C. The listing says it suits electric bike packs and 48V systems rated below 2500W.

The key figures: maximum current 60A, continuous current 40A DC, maximum charging current 10A, overcharge protection at 4.25V per cell and deep-discharge protection at 2.6V per cell. The listing says the separate charge and discharge ports reduce MOSFET heat during charging. Make sure your system's power does not exceed 2500W and its continuous running current stays within 40A.

Supported cells according to the listing: Ternary 3.7V, LiCoO2 and LiMn2O4. The built-in balancing is passive and works during charging, and the connection terminals are B-, C- and P- with a cell balancing cable.

Installation notes: connect the balance wires in order from B- upward to the last cell before connecting the P- and C- terminals; the listing warns that a wrong order burns out the measuring circuit immediately. Mount the board on a metal surface to dissipate heat. In the box: one 13S, 60A BMS protection board with a cell balancing cable. It is new, with a 1-month warranty.

Suitable for

  • 48V electric bike battery packs
  • Small home energy-storage systems
  • Utility carts and electric motorcycles

Seller's description

لوحة حماية BMS مصمَّمة لحزم ليثيوم أيون بترتيب 13S أي 48V اسمية، وتتحمّل تياراً أقصى يبلغ 60A بمنافذ شحن وتفريغ منفصلة من نوع split port. تراقب الدائرة فولتية كل خلية على حدة وتفصل الحزمة عند الشحن الزائد أو التفريغ العميق أو القِصَر، وتضمّ متحسس حرارة يقطع التفريغ عند 75°C. مناسبة لحزم الدراجات الكهربائية وأنظمة 48V التي تقل قدرتها عن 2500W.

أبرز المزايا

  • حماية شحن زائد عند 4.25V لكل خلية وتفريغ عميق عند 2.6V
  • تيار تشغيل أقصى 60A وتيار مستمر يصل إلى 40A
  • منفذا شحن وتفريغ منفصلان يقللان حرارة الـMOSFET أثناء الشحن
  • تيار شحن أقصى 10A يناسب شواحن 48V القياسية
  • حماية حرارية تفصل التفريغ عند 75°C
  • متوافقة مع خلايا 3.7V من نوع ternary وlithium cobaltate وlithium manganate

الاستخدامات الشائعة

  • حزم بطاريات الدراجات الهوائية والسكوتر الكهربائي بجهد 48V
  • أنظمة تخزين طاقة منزلية صغيرة وإنارة احتياطية
  • تجميعات 18650 لتشغيل محركات DC والعدد الكهربائية
  • بطاريات عربات التوصيل والدراجات النارية الكهربائية

ملاحظة: وصّل أسلاك الموازنة بالترتيب من B- صعوداً حتى آخر خلية قبل توصيل طرفي P- وC-، فأي ترتيب خاطئ يحرق دائرة القياس فوراً. ثبّت اللوحة على سطح معدني لتصريف الحرارة.

What's in the box

لوحة حماية BMS بترتيب 13S وتيار 60A واحدة مع كيبل موازنة الخلايا

Specifications

Cell count13S بجهد اسمي 48V
Maximum current60A
Continuous current40A DC
Maximum charge current10A
Overcharge protection4.25V لكل خلية
Deep-discharge protection2.6V لكل خلية
Maximum powerأقل من 2500W
Port typeمنفصلة split port للشحن والتفريغ
Thermal protectionفصل التفريغ عند 75°C
Supported cellsTernary 3.7V / LiCoO2 / LiMn2O4
وظائف الحمايةشحن زائد، تفريغ عميق، تيار زائد، قِصَر
الموازنةموازنة سلبية passive أثناء الشحن
أطراف التوصيلB- و C- و P- مع كيبل موازنة الخلايا
CategoryAutomotive, Mobility & Transport Electronics
More categoriesBattery-management systems
ConditionNew
Warranty1-month warranty
SKUNTK-0490

Questions about لوحة حماية BMS لبطاريات ليثيوم أيون 13S بجهد 48V وتيار 60A مع موازنة | 13S 48V 60A Li-ion BMS Protection Board with Balancer, Split Port

It currently costs 19,500 IQD from Nanotik on SinaaStore (updated 16 November 2026).
The listing names Ternary 3.7V, LiCoO2 and LiMn2O4. If your cells are another type, ask the shop through chat.
Maximum 60A and continuous 40A DC, according to the listing.
Passive balancing during charging, according to the listing.
The listing describes separate ports for charging and discharging, which reduce MOSFET heat while charging.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.