RFID card

بطاقة RFID بتردد 13.56MHz معيار ISO14443A متوافقة مع MIFARE Classic 1K | 13.56MHz RFID Proximity Card ISO14443A MIFARE Classic 1K Compatible

⁨بطاقة RFID بتردد 13.56MHz معيار ISO14443A متوافقة مع MIFARE Classic 1K | 13.56MHz RFID Proximity Card ISO14443A MIFARE Classic 1K Compatible⁩ — ⁨2,200 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • 13.56MHz, ISO14443A standard
  • MIFARE Classic 1K compatible
  • 1KB memory in 16 sectors
  • Key A and Key B per sector
  • PVC body, 85.6 × 54 mm
2,200IQD2,750IQDخصم 20%In stock
1

Ask about stock or request a better price

Price

2,200IQD

Its price has held at 2,750 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

13.56MHz ISO14443A RFID card compatible with MIFARE Classic 1K, with 1KB of memory, suited to access systems and Arduino or ESP32 projects.

This is a credit-card-sized RFID card operating at 13.56MHz to the ISO14443A standard and compatible with the MIFARE Classic 1K protocol widely used in access systems and RC522 modules. It has internal memory divided into key-protected sectors, so it stores data and not just an ID number. It works without a battery, drawing power by induction from the reader antenna.

The 1KB of memory is spread over 16 sectors of 4 blocks each and is readable and writable. Every sector is protected by two keys, Key A and Key B, and each card has a unique 4-byte UID that can be used alone in simple applications. The data rate is 106 kbit/s, the reading range is about 2 to 5 cm and the operating temperature runs from -20°C to +55°C.

The body is thin PVC in the ISO card size of 85.6 × 54 mm, printable and able to take daily use in a wallet. Compatible readers listed are RC522, PN532 and 13.56MHz readers. Common uses are staff access cards and door control, Arduino and ESP32 projects with an RC522 module, membership and student card systems, and storing a balance or user ID.

An important warning when writing to the card: mind the Trailer sector, which holds the keys and access bits, because a wrong write to it locks the sector permanently and it cannot be recovered. The box holds one 13.56MHz RFID card. The condition is new and the warranty is 1 month.

Suitable for

  • Staff access cards and door control systems
  • Arduino and ESP32 projects with an RC522 module
  • Membership, club and student card systems
  • Storing a balance or user ID in loyalty applications

Seller's description

بطاقة تعريف لاسلكية بحجم بطاقة الائتمان تعمل بتردد 13.56MHz وفق معيار ISO14443A، وتتوافق مع بروتوكول MIFARE Classic 1K المنتشر في أنظمة الدخول ووحدات RC522. تحتوي على ذاكرة داخلية مقسّمة إلى قطاعات محمية بمفاتيح، ما يسمح بتخزين بيانات وليس رقم تعريف فقط. تعمل بلا بطارية عبر الاستحثاث من هوائي القارئ.

أبرز المزايا

  • تردد 13.56MHz ومعيار ISO14443A متوافق مع وحدات RC522 و PN532.
  • ذاكرة 1KB موزّعة على 16 قطاعاً قابلة للقراءة والكتابة.
  • حماية بمفاتيح Key A و Key B لكل قطاع تمنع العبث بالبيانات.
  • رقم تعريف UID فريد يمكن استخدامه وحده في التطبيقات البسيطة.
  • جسم PVC رقيق قابل للطباعة عليه ويتحمل الاستخدام اليومي في المحفظة.

الاستخدامات الشائعة

  • بطاقات دخول الموظفين وأنظمة التحكم بالأبواب.
  • مشاريع Arduino و ESP32 مع وحدة القارئ RC522.
  • أنظمة الاشتراكات والنوادي وبطاقات الطلبة.
  • تخزين رصيد أو معرّف مستخدم في تطبيقات النقاط.

ملاحظة: عند الكتابة على البطاقة انتبه لقطاع Trailer الذي يحتوي المفاتيح وبتات الصلاحية؛ الكتابة الخاطئة عليه تقفل القطاع نهائياً ولا يمكن استرجاعه.

What's in the box

بطاقة RFID واحدة بتردد 13.56MHz

Specifications

Operating frequency13.56MHz (HF)
StandardISO/IEC 14443 Type A
ProtocolMIFARE Classic 1K
Memory capacity1KB (16 قطاعاً × 4 كتل)
ID numberUID بطول 4 بايت
Read rangeنحو 2 إلى 5 سم
Material and sizePVC بقياس بطاقة ISO 85.6 × 54 mm
الحمايةمفتاحان Key A و Key B لكل قطاع
التغذيةخاملة Passive بلا بطارية
معدل نقل البيانات106 kbit/s
القارئات المتوافقةRC522 و PN532 وقارئات 13.56MHz
مدى حرارة التشغيل-20°C إلى +55°C
CategoryIndustrial, Commercial & Specialized Electronics
More categoriesRFID and NFC hardware
ConditionNew
Warranty1-month warranty
SKUNTK-0039

Questions about بطاقة RFID بتردد 13.56MHz معيار ISO14443A متوافقة مع MIFARE Classic 1K | 13.56MHz RFID Proximity Card ISO14443A MIFARE Classic 1K Compatible

It currently costs 2,200 IQD (was 2,750 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
Yes, the listing states it is compatible with RC522 and PN532 modules and 13.56MHz readers.
Yes, the 1KB memory is readable and writable, but mind the Trailer sector because a wrong write locks it permanently.
No, the card is passive and works without a battery by induction from the reader antenna.
About 2 to 5 cm, according to the listing.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.