Tactile switch

مفتاح تاكت 12x12x8mm بأربعة أطراف | 12x12x8mm Tactile Push Button Switch, 4-Pin Through-Hole

⁨مفتاح تاكت 12x12x8mm بأربعة أطراف | 12x12x8mm Tactile Push Button Switch, 4-Pin Through-Hole⁩ — ⁨1,750 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • 12x12x8mm momentary tactile switch
  • 4 through-hole pins
  • Normally open (NO)
  • Rated 12V DC / 50mA
  • New, with a 1 months warranty
1,750IQD2,500IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

1,750IQD

Its price has held at 2,500 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

12x12x8mm momentary tactile switch with 4 through-hole pins, normally open, for control boxes and electronics projects.

This is a momentary tactile switch with a 12x12mm body and an overall height of 8mm; its button stands higher than the 12x12x7mm version, reaching past thick panels and plastic covers. It mounts with 4 pins passing through the board holes (through-hole) and is normally open (NO).

The listing mentions a clear press feel with an audible click, a momentary contact that returns automatically when pressure is released, and a metal cover protecting the press mechanism. Approximate actuation force is about 160gf, contact resistance is around 100mΩ or lower, and operating temperature runs from -25°C to +70°C. The diagonally opposite pins form the circuit.

The electrical rating is 12V DC / 50mA, which is signal level only, so do not pass a direct load such as a lamp or motor through it; use it to trigger a relay or transistor instead. The listing mentions a shorter 7mm version and a taller 9mm one, so choose the 8mm height if your enclosure's button needs that length.

It suits command and menu buttons in control boxes, microcontroller projects, repairing audio equipment and chargers by replacing their buttons, and handmade button boards on Perfboard, especially buttons pressed directly by finger without a cap. The product is new, the box holds one switch, with a 1 months warranty.

Suitable for

  • Command buttons in control boxes
  • Microcontroller projects
  • Replacing buttons in audio equipment and chargers
  • Handmade button boards on Perfboard

Seller's description

مفتاح تاكت لحظي بجسم 12x12mm وارتفاع إجمالي 8mm، أي أن زره يبرز مليمتراً واحداً أكثر من نسخة 12x12x7mm ليصل إلى ما بعد الواجهات السميكة والأغطية البلاستيكية. يُثبَّت بأربعة أطراف تمر عبر ثقوب اللوحة الإلكترونية ويعمل مفتوحاً عادةً NO. مناسب للوحات التحكم والصناديق التي يُضغط زرها مباشرة بالإصبع دون غطاء إضافي.

أبرز المزايا

  • ارتفاع 8mm وسط بين نسخة 7mm القصيرة ونسخة 9mm الأطول
  • أربعة أطراف عبر الثقوب تعطي ثباتاً ميكانيكياً جيداً على اللوحة
  • ملمس ضغط واضح يعطي إحساساً مسموعاً بالنقر عند التشغيل
  • تلامس لحظي يعود تلقائياً فور رفع الضغط
  • جسم قياسي يسهّل استبداله في الأجهزة الجاهزة

الاستخدامات الشائعة

  • أزرار الأوامر والقوائم في صناديق التحكم الإلكترونية
  • مشاريع المتحكمات الدقيقة ولوحات التطوير
  • صيانة أجهزة الصوت والشواحن واستبدال أزرارها
  • لوحات أزرار يدوية الصنع على Perfboard

ملاحظة: التقييم الكهربائي للمفتاح عند مستوى الإشارة فقط (بحدود 50mA)، فلا تمرّر عبره حمل مباشر مثل مصباح أو محرك، بل استخدمه لتشغيل ريليه أو ترانزستور.

What's in the box

مفتاح تاكت واحد قياس 12x12x8mm

Specifications

Body size12x12mm
Overall height8mm
Number of pins4
Contact typeلحظي، مفتوح عادةً (NO)
Electrical rating12V DC / 50mA
Operating temperature-25°C إلى +70°C
طريقة التركيبthrough-hole عبر ثقوب اللوحة
توصيل الأطرافالطرفان المتقابلان قطرياً يشكلان الدائرة
قوة الضغط التقريبيةنحو 160gf
مقاومة التلامسمنخفضة بحدود 100mΩ أو أقل
الغطاءغطاء معدني يحمي آلية الضغط
استعمال شائعأزرار تُضغط مباشرة بالإصبع دون غطاء
CategorySemiconductors, ICs & Electronic Components
More categoriesElectromechanical components & connectors
ConditionNew
Warranty1-month warranty
SKUNTK-0037

Questions about مفتاح تاكت 12x12x8mm بأربعة أطراف | 12x12x8mm Tactile Push Button Switch, 4-Pin Through-Hole

It currently costs 1,750 IQD (was 2,500 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
It is rated 12V DC / 50mA, signal level only, and is not meant to carry a direct load like a lamp or motor.
The overall height is 8mm, taller than the 7mm version, according to the listing.
The listing says the diagonally opposite pins form the circuit.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.