Tactile switch

مفتاح تاكت 12x12mm بأربعة أطراف | 12x12x7mm Tactile Push Button Switch, 4-Pin Through-Hole

⁨مفتاح تاكت 12x12mm بأربعة أطراف | 12x12x7mm Tactile Push Button Switch, 4-Pin Through-Hole⁩ — ⁨1,750 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • 12x12mm body, 7mm overall height
  • 4 through-hole pins
  • Momentary, normally open (NO) contact
  • Rated 12V DC / 50mA
  • New, with a 1 month warranty
1,750IQD2,500IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

1,750IQD

Its price has held at 2,500 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Momentary tactile switch with a large 12x12mm body, 7mm height and 4 through-hole pins, rated 12V DC / 50mA.

A momentary tactile switch with a large 12x12mm body and 7mm overall height, much bigger than the common 6x6mm size, which makes pressing it directly with a finger easier and clearer. It is normally open (NO), so it closes the circuit only while pressed and opens it when you release.

It mounts with 4 pins that pass through the holes of the circuit board (through-hole), which the listing says gives mechanical stability under repeated pressing; the pins form internally connected pairs. The electrical rating is 12V DC / 50mA, which suits signal and logic control circuits rather than heavy loads. Contact resistance is typically under 100mΩ, mechanical life is about 100,000 presses, and the operating temperature range is -20°C to +70°C.

The 7mm height suits mounting behind a thin front panel, and the large press area needs no cap or tool. Switches like this are used in control panels, measuring instruments and household appliance buttons, as power and input buttons in Arduino projects, and in manual control boxes. Materials per the listing: a heat-resistant plastic housing with plated copper pins.

A note from the listing: add a pull-up or pull-down resistor and handle contact bounce (debounce) in software or with a 100nF capacitor, because mechanical contact produces pulses that can be read as multiple presses. The item is new with a 1 month warranty, and the box contains one 12x12x7mm tactile switch.

Suitable for

  • Buttons for control panels and measuring instruments
  • Power and input buttons in Arduino projects
  • Manual control boxes and custom button panels

Seller's description

مفتاح تاكت لحظي بجسم كبير قياس 12x12mm وارتفاع إجمالي 7mm، أي أكبر بكثير من مقاس 6x6mm الشائع ما يجعل الضغط عليه بالإصبع مباشرة أسهل وأوضح. يُثبَّت بأربعة أطراف تمر عبر ثقوب اللوحة الإلكترونية فيتحمل الضغط المتكرر دون أن يتزحزح، ويعمل مفتوحاً عادةً NO فيغلق الدائرة أثناء الضغط فقط.

أبرز المزايا

  • مساحة ضغط 12x12mm مريحة للإصبع ولا تحتاج أداة أو غطاء
  • ارتفاع إجمالي 7mm مناسب للتركيب خلف لوحة أمامية رقيقة
  • أربعة أطراف THT تمنحه ثباتاً ميكانيكياً أمام الضغط المتكرر
  • تقييم كهربائي 12V DC / 50mA يكفي دوائر الإشارة والتحكم المنطقي
  • ملمس نقري واضح يؤكد تسجيل كل ضغطة

الاستخدامات الشائعة

  • لوحات التحكم وأجهزة القياس وأزرار الأجهزة المنزلية
  • أزرار التشغيل والإدخال في مشاريع Arduino وESP32
  • صناديق التحكم اليدوية ولوحات الأزرار المخصصة

ملاحظة: أضف مقاومة سحب pull-up أو pull-down ومعالجة ارتداد debounce برمجية أو بمكثف 100nF، لأن التلامس الميكانيكي يولّد نبضات ارتداد قد تُقرأ كضغطات متعددة.

What's in the box

مفتاح تاكت واحد قياس 12x12x7mm

Specifications

Body size12x12mm
Overall height7mm
Pins4 أطراف
Mountingthrough-hole
Contact typeلحظي، مفتوح عادةً (NO)
Electrical rating12V DC / 50mA
Mechanical lifeنحو 100,000 ضغطة
Operating temperature-20°C إلى +70°C
مقاومة التلامسأقل من 100mΩ نموذجياً
مادة التصنيعغلاف بلاستيكي مقاوم للحرارة وأطراف نحاسية مطلية
CategorySemiconductors, ICs & Electronic Components
More categoriesElectromechanical components & connectors
ConditionNew
Warranty1-month warranty
SKUNTK-0024

Questions about مفتاح تاكت 12x12mm بأربعة أطراف | 12x12x7mm Tactile Push Button Switch, 4-Pin Through-Hole

It currently costs 1,750 IQD (was 2,500 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
The body is 12x12mm and the overall height is 7mm, according to the listing.
No, it is rated 12V DC / 50mA and suits signal and logic control circuits, as the listing states.
Yes, the listing recommends a pull-up or pull-down resistor and debounce handling in software or with a 100nF capacitor.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.