Tactile switch

مفتاح تاكت 12x12x6mm بأربعة أطراف | 12x12x6mm Tactile Push Button Switch, 4-Pin Through-Hole

⁨مفتاح تاكت 12x12x6mm بأربعة أطراف | 12x12x6mm Tactile Push Button Switch, 4-Pin Through-Hole⁩ — ⁨1,750 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • 6mm total height, 12x12mm body
  • 4 through-hole pins
  • Momentary, normally open (NO)
  • Accepts button caps made for a 12x12mm body
  • New, with a 1-month warranty
1,750IQD2,500IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

1,750IQD

Its price has held at 2,500 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Momentary 12x12mm tactile switch, 6mm total height with 4 through-hole pins, suited to boards that use a button cap or pressing membrane.

This is a momentary tactile switch with a 12x12mm body and a total height of only 6mm, the shortest in this family per the listing, as the plunger barely rises above the body. That is why it suits boards fitted with a plastic button cap or whose buttons are pressed through a membrane or a front panel sitting right against them.

It works as a momentary, normally-open (NO) switch and is soldered by 4 pins passing through the board holes (through-hole / THT), which form internally connected pairs for a strong mechanical hold. The electrical rating is 12V DC / 50mA for signal circuits, contact resistance is under 100mΩ (typical), mechanical life is about 100,000 presses and the operating range is -20°C to +70°C. The feel is a light tactile click that reduces noise compared with tall switches.

The 12x12mm body accepts standard wide-diameter button caps, and the listing states compatibility with button caps made for a 12x12mm body. It is used in keypads and panels with a cap or membrane, slim devices and remote controls, and development boards and selector buttons in microcontroller projects.

Because the plunger is so short, pressing it directly by finger may be hard, so plan for a button cap or make the front panel touch the plunger before fixing the switch to the board. The item is new, the box holds one 4-pin switch, and the stated warranty is 1 month.

Suitable for

  • Keypads and panels with a cap or membrane
  • Slim devices and remote controls
  • Selector buttons in microcontroller projects

Seller's description

مفتاح تاكت لحظي بجسم 12x12mm وارتفاع إجمالي 6mm، وهو أقصر مقاسات هذه العائلة إذ لا يكاد العمود يبرز فوق الجسم. يناسب اللوحات التي يُركَّب فوقها غطاء زر بلاستيكي (cap) أو التي تُضغط أزرارها عبر غشاء أو لوحة أمامية ملاصقة. يعمل مفتوحاً عادةً NO ويُلحم بأربعة أطراف تمر عبر ثقوب اللوحة الإلكترونية.

أبرز المزايا

  • ارتفاع إجمالي 6mm فقط يناسب الأجهزة الرفيعة والمساحة الضيقة فوق اللوحة
  • جسم 12x12mm يتيح تركيب أغطية أزرار قياسية بقطر واسع
  • أربعة أطراف through-hole تعطي تثبيتاً ميكانيكياً قوياً على اللوحة
  • تقييم كهربائي نموذجي 12V DC / 50mA لدوائر الإشارة
  • ملمس نقري خفيف يقلل الضجيج مقارنة بالمفاتيح الطويلة

الاستخدامات الشائعة

  • لوحات المفاتيح والواجهات التي تستخدم غطاء زر أو غشاء ضغط
  • الأجهزة الرفيعة وأجهزة التحكم عن بُعد
  • لوحات التطوير وأزرار الاختيار في مشاريع المتحكمات

ملاحظة: بسبب قصر العمود قد يصعب الضغط عليه بالإصبع مباشرة؛ خطّط لتركيب غطاء زر أو اجعل اللوحة الأمامية ملامسة للعمود قبل تثبيت المفتاح على اللوحة.

What's in the box

مفتاح تاكت واحد قياس 12x12x6mm بأربعة أطراف

Specifications

Body size12x12mm
Total height6mm
Pins4 أطراف
Mountingthrough-hole (THT)
Contact typeلحظي، مفتوح عادةً (NO)
Electrical rating12V DC / 50mA
Mechanical lifeنحو 100,000 ضغطة
Operating temperature-20°C إلى +70°C
مقاومة التلامسأقل من 100mΩ نموذجياً
التوافقيقبل أغطية أزرار مخصصة لجسم 12x12mm
CategorySemiconductors, ICs & Electronic Components
More categoriesElectromechanical components & connectors
ConditionNew
Warranty1-month warranty
SKUNTK-0443

Questions about مفتاح تاكت 12x12x6mm بأربعة أطراف | 12x12x6mm Tactile Push Button Switch, 4-Pin Through-Hole

It currently costs 1,750 IQD (was 2,500 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
The total height is 6mm and the body is 12x12mm.
The plunger is short, so direct pressing may be hard; the listing advises a button cap or a front panel that touches the plunger.
The electrical rating is 12V DC / 50mA, so it is for signal circuits.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.