Tactile switch

مفتاح تاكت 12x12x18mm بأربعة أطراف | 12x12x18mm Tactile Push Button Switch, 4-Pin Through-Hole

⁨مفتاح تاكت 12x12x18mm بأربعة أطراف | 12x12x18mm Tactile Push Button Switch, 4-Pin Through-Hole⁩ — ⁨1,750 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • 18mm total height, 12x12mm body
  • 4 through-hole pins for soldering to the board
  • Momentary, normally open (NO)
  • Electrical rating 12V DC / 50mA
  • New, with a 1-month warranty
1,750IQD2,500IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

1,750IQD

Its price has held at 2,500 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Momentary 12x12mm tactile switch, 18mm total height with 4 through-hole pins, suited to thick enclosures that need a long plunger.

This is a momentary tactile switch with a 12x12mm body and an 18mm total height. The height is what sets it apart: the plunger extends well above the board so it can reach the enclosure opening even on devices with a thick front panel or a large gap between the board and the front face. The listing therefore points to enclosures that need a protruding plunger, without a cap or extension piece.

It works as a momentary, normally-open (NO) switch: the circuit closes while you press and opens again when you release. Mounting is through-hole (THT) with 4 pins that pass through the board holes and are soldered; the 4 pins form internally connected pairs, which gives firm mechanical hold under repeated pressing. The stated electrical rating is 12V DC / 50mA, suited to signal and control circuits such as input buttons in Arduino and STM32 projects, industrial control panels and custom button boxes.

Other listed specs are contact resistance of under 100mΩ (typical), a mechanical life of about 100,000 presses and an operating temperature range of -20°C to +70°C. The feel is a clear tactile click that confirms each press, and the 12x12mm body gives a comfortable pressing area by finger without a tool.

Before buying, check that an 18mm height really fits your enclosure and that the enclosure hole is centred with enough clearance around the plunger, because pressing at an angle or with a hard tool can snap the plastic stem through side force. The item is new, the box holds one 12x12x18mm tactile switch with 4 pins, and the stated warranty is 1 month.

Suitable for

  • Devices with a thick front panel
  • Industrial control panels and button boxes
  • Arduino and STM32 projects as a manual input button

Seller's description

مفتاح تاكت لحظي بجسم 12x12mm وارتفاع إجمالي 18mm، وهو أطول مقاسات هذه العائلة، إذ يمتد عمود الزر مسافة كبيرة فوق اللوحة ليخرج من فتحة الغلاف حتى في الأجهزة ذات الواجهة السميكة أو المسافة الكبيرة بين اللوحة والوجه الأمامي. يعمل مفتوحاً عادةً NO ويُلحم بأربعة أطراف عبر ثقوب اللوحة الإلكترونية.

أبرز المزايا

  • عمود بارتفاع إجمالي 18mm يغني عن استخدام غطاء أو وصلة إطالة
  • جسم 12x12mm يمنح مساحة ضغط مريحة بالإصبع دون أداة
  • أربعة أطراف THT تثبّت المفتاح بقوة أمام الضغط الجانبي المتكرر
  • تقييم كهربائي نموذجي 12V DC / 50mA يكفي دوائر الإشارة والتحكم
  • ملمس نقري واضح يعطي تأكيداً حسياً لكل ضغطة

الاستخدامات الشائعة

  • واجهات الأجهزة ذات الغلاف السميك أو الفراغ الكبير فوق اللوحة
  • لوحات التحكم الصناعية وصناديق الأزرار المخصصة
  • مشاريع التحكم مع Arduino وSTM32 وأزرار الإدخال اليدوي

ملاحظة: لا تضغط العمود الطويل بشكل مائل أو بأداة صلبة لأن العزم الجانبي قد يكسر العمود البلاستيكي؛ اجعل فتحة الغلاف مركزية وبفراغ كافٍ حول العمود.

What's in the box

مفتاح تاكت واحد قياس 12x12x18mm بأربعة أطراف

Specifications

Body size12x12mm
Total height18mm
Pins4 أطراف
Mountingthrough-hole (THT)
Contact typeلحظي، مفتوح عادةً (NO)
Electrical rating12V DC / 50mA
Mechanical lifeنحو 100,000 ضغطة
Operating temperature-20°C إلى +70°C
مقاومة التلامسأقل من 100mΩ نموذجياً
الاستخدام المناسبالأغلفة السميكة التي تحتاج عموداً بارزاً
CategorySemiconductors, ICs & Electronic Components
More categoriesElectromechanical components & connectors
ConditionNew
Warranty1-month warranty
SKUNTK-0290

Questions about مفتاح تاكت 12x12x18mm بأربعة أطراف | 12x12x18mm Tactile Push Button Switch, 4-Pin Through-Hole

It currently costs 1,750 IQD (was 2,500 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
The total height is 18mm and the body is 12x12mm, according to the listing.
The stated rating is 12V DC / 50mA, so it suits signal and control circuits rather than large loads.
It has 4 through-hole pins soldered through the board holes, arranged as internally connected pairs.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.