Tactile push button switch

مفتاح تاكت 12x12x15mm بأربعة أطراف | 12x12x15mm Tactile Push Button Switch, 4-Pin Through-Hole

⁨مفتاح تاكت 12x12x15mm بأربعة أطراف | 12x12x15mm Tactile Push Button Switch, 4-Pin Through-Hole⁩ — ⁨1,750 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • 12x12mm body, 15mm overall height
  • 4 through-hole pins for stability
  • Momentary, normally open (NO)
  • Rated 12V DC / 50mA
  • New, with a 1 months warranty
1,750IQD2,500IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

1,750IQD

Its price has held at 2,500 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Momentary 12x12mm tactile switch, 15mm tall with 4 through-hole pins and a normally open contact, for control and input buttons.

A momentary tactile switch with a square 12x12mm body and 15mm overall height, so the button stands high above the board surface and can be reached through an opening in the device housing without an extra cap. It is normally open (NO), closing the circuit while pressed and opening it as soon as you lift your finger.

It mounts with 4 pins passing through the board holes (through-hole), giving more mechanical stability than switches with fewer pins, spreading stress and preventing solder joints from loosening. The 12x12mm body is larger than the common 6x6mm size, so it is easier to press directly with a finger.

The electrical rating is 12V DC / 50mA, contact resistance is typically below 100mΩ, mechanical life is about 100,000 presses and the operating temperature range is -20°C to +70°C. The housing is heat-resistant plastic with plated copper pins. Do not pass a large load such as a motor or lamp directly through it; use it for the control signal only and leave load switching to a relay or transistor.

Listed uses include control panels and power buttons in household and industrial devices, reset and command buttons in Arduino and ESP32 projects, and measuring instruments and meters. The item is new with a 1 months warranty.

Suitable for

  • Power buttons in control panels
  • Reset and input buttons in Arduino and ESP32 projects
  • Prominent buttons on measuring instruments and meters

Seller's description

مفتاح تاكت لحظي بجسم مربع قياس 12x12mm وارتفاع إجمالي 15mm، أي أن الزر يبرز عالياً فوق سطح اللوحة فيمكن الوصول إليه عبر فتحة في غلاف الجهاز دون الحاجة إلى غطاء إضافي. يعمل مفتوحاً عادةً NO فيغلق الدائرة أثناء الضغط ويفتحها فور رفع الإصبع. يُثبَّت بأربعة أطراف تمر عبر ثقوب اللوحة فتمنحه ثباتاً ميكانيكياً أعلى بكثير من مفاتيح الطرفين.

أبرز المزايا

  • جسم 12x12mm أكبر من مقاس 6x6mm الشائع فيسهل الضغط عليه بالإصبع مباشرة
  • ارتفاع إجمالي 15mm يتجاوز سماكة اللوحة الأمامية للغلاف دون وصلة إطالة
  • أربعة أطراف through-hole توزّع الإجهاد الميكانيكي وتمنع تفكك اللحام
  • تقييم كهربائي نموذجي 12V DC بتيار 50mA لدوائر الإشارة والتحكم
  • عمر ميكانيكي يصل إلى نحو 100,000 ضغطة في الاستخدام الاعتيادي

الاستخدامات الشائعة

  • لوحات التحكم وأزرار التشغيل في الأجهزة المنزلية والصناعية
  • أزرار reset وإدخال الأوامر في مشاريع Arduino وESP32
  • أجهزة القياس والعدادات التي تحتاج زراً بارزاً واضح الملمس

ملاحظة: لا تمرر عبره حملاً كبيراً مثل محرك أو مصباح مباشرة؛ استخدمه لتمرير إشارة التحكم فقط واترك قطع الحمل لريلاي أو ترانزستور حتى لا تتآكل نقاط التلامس.

What's in the box

مفتاح تاكت واحد قياس 12x12x15mm بأربعة أطراف

Specifications

Body size12x12mm
Overall height15mm
Pin count4 أطراف (زوجان متصلان داخلياً)
Mountingthrough-hole (THT) عبر ثقوب اللوحة
Contact typeلحظي، مفتوح عادةً (NO)
Electrical rating12V DC / 50mA
Mechanical lifeنحو 100,000 ضغطة
مقاومة التلامسأقل من 100mΩ نموذجياً
مدى حرارة التشغيل-20°C إلى +70°C
مادة التصنيعغلاف بلاستيكي مقاوم للحرارة وأطراف نحاسية مطلية
CategorySemiconductors, ICs & Electronic Components
More categoriesElectromechanical components & connectors
ConditionNew
Warranty1-month warranty
SKUNTK-0265

Questions about مفتاح تاكت 12x12x15mm بأربعة أطراف | 12x12x15mm Tactile Push Button Switch, 4-Pin Through-Hole

It currently costs 1,750 IQD (was 2,500 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
The overall height is 15mm with a 12x12mm body.
No, the listing advises using it for the control signal only and leaving load switching to a relay or transistor.
12V DC / 50mA, according to the listing.
The listing does not mention a cap and says the button can protrude through the housing without an extra cap, so ask the shop through chat if you need one.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.