Tact switch

مفتاح تاكت 12x12x12mm بأربعة أطراف Through-Hole ساق طويلة | 12x12x12mm Tact Switch 4-Pin Through-Hole Tall Actuator

⁨مفتاح تاكت 12x12x12mm بأربعة أطراف Through-Hole ساق طويلة | 12x12x12mm Tact Switch 4-Pin Through-Hole Tall Actuator⁩ — ⁨1,750 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • 12x12mm body, 12mm overall height
  • 4 through-hole (DIP) pins
  • Momentary normally open (NO)
  • Typical rating 50V DC / 100mA
  • New, with a 1 months warranty
1,750IQD2,500IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

1,750IQD

Its price has held at 2,500 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Momentary 12x12mm tact switch, 12mm overall height with 4 through-hole pins and a tall actuator that protrudes through an enclosure front.

A momentary tact switch with a large 12x12mm body, 12mm overall height and 4 pins that solder into the board holes. The wider body gives a comfortable, stable press under the finger, and its tall actuator lets the button protrude through an enclosure front without an extra cap. Per the listing it is taller than the 9mm and 10mm versions and a millimetre shorter than the 13mm version of the same family.

The contact type is momentary normally open (Momentary NO), and it mounts through-hole (DIP) with 4 pins that hold the switch mechanically under repeated pressing. The typical electrical rating is 50V DC / 100mA, higher than 6x6mm switches, with contact resistance ≤100mΩ, insulation resistance ≥100MΩ, a typical actuation force of 160 ± 50 gf, a mechanical life of ≈100,000 presses and an operating temperature of -25°C to +70°C.

Before choosing, measure the thickness of the enclosure front: with a 12mm overall height the button should stand slightly proud of the front, otherwise it stays pressed and keeps the circuit permanently closed. Button caps in 12x12mm size come in multiple colours, but the listing does not say they are included, so ask the shop.

Listed uses include industrial control panels and locally built devices, power and input buttons on chargers and power systems, keypads with large buttons and measuring instruments, and Arduino projects. The item is new with a 1 months warranty, and the box holds one tact switch.

Suitable for

  • Power and input buttons on chargers and power systems
  • Industrial control panels and locally built devices
  • Prominent buttons on measuring instruments and Arduino projects

Seller's description

مفتاح تاكت لحظي بجسم كبير 12x12mm وارتفاع كلي 12mm وأربعة أطراف تُلحم في ثقوب اللوحة. مساحة الجسم الأوسع تعطي ضغطة مريحة ومستقرة تحت الإصبع، وساقه الطويلة تسمح للزر بالبروز عبر واجهة العلبة دون غطاء إضافي. هو أطول من نسختي 9mm و10mm وأقصر بمليمتر واحد من نسخة 13mm من العائلة نفسها.

أبرز المزايا

  • جسم 12x12mm يعطي مساحة ضغط أوسع وأثبت من مفاتيح 6x6mm
  • ارتفاع كلي 12mm يكفي لبروز الزر عبر واجهة العلبة
  • أربعة أطراف تثبّت المفتاح ميكانيكيًا تحت الضغط المتكرر
  • غطاء زر متوفر بألوان وأشكال متعددة لهذا المقاس
  • تقييم كهربائي نموذجي 50V DC / 100mA أعلى من مفاتيح 6x6mm

الاستخدامات الشائعة

  • لوحات التحكم الصناعية والأجهزة المصنّعة محليًا
  • أزرار التشغيل والإدخال في الشواحن ومنظومات الطاقة
  • لوحات المفاتيح ذات الأزرار الكبيرة وأجهزة القياس
  • مشاريع Arduino التي تحتاج زرًا واضحًا على الواجهة

ملاحظة: قِس سماكة واجهة العلبة قبل الاختيار: مع 12mm ارتفاعًا كليًا يجب أن يبقى بروز الزر خارج الواجهة بحدود مليمتر أو اثنين، وإلا بقي الزر مضغوطًا وأبقى الدائرة مغلقة باستمرار.

What's in the box

مفتاح تاكت واحد قياس 12x12x12mm

Specifications

Body size12 × 12 mm
Overall height12mm
Pin count4 Pins
Contact typeلحظي، مفتوح عادةً (Momentary NO)
MountingThrough-Hole (DIP)
Typical electrical rating50V DC / 100mA
Typical actuation force160 ± 50 gf
Typical mechanical life≈100,000 ضغطة
مقاومة التلامس≤100mΩ
مقاومة العزل≥100MΩ
توافق أغطية الأزرارأغطية مقاس 12x12mm بألوان متعددة
مدى حرارة التشغيل-25°C إلى +70°C
استعمال شائعبروز الزر عبر واجهة العلبة
CategorySemiconductors, ICs & Electronic Components
More categoriesElectromechanical components & connectors
ConditionNew
Warranty1-month warranty
SKUNTK-0147

Questions about مفتاح تاكت 12x12x12mm بأربعة أطراف Through-Hole ساق طويلة | 12x12x12mm Tact Switch 4-Pin Through-Hole Tall Actuator

It currently costs 1,750 IQD (was 2,500 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
The overall height is 12mm with a 12x12mm body.
A typical rating of 50V DC / 100mA, according to the listing.
Measure the enclosure front thickness; the button must stand slightly proud of the front or it stays pressed.
The listing mentions 12x12mm caps exist but does not say they are included, so ask the shop through chat.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.