Tact switch

مفتاح تاكت 12x12x10mm بأربعة أطراف Through-Hole لحظي | 12x12x10mm Tact Switch 4-Pin Through-Hole Momentary Push Button

⁨مفتاح تاكت 12x12x10mm بأربعة أطراف Through-Hole لحظي | 12x12x10mm Tact Switch 4-Pin Through-Hole Momentary Push Button⁩ — ⁨1,750 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • 12x12mm body, 10mm overall height
  • 4 Through-Hole pins for soldering
  • Momentary normally open (NO) contact
  • 12V DC / 50mA signal-level rating
  • New, with a 1-month warranty
1,750IQD2,500IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

1,750IQD

Its price has held at 2,500 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Momentary tact switch with a 12x12mm body, 10mm overall height and 4 pins soldered through the board.

This is a momentary tact switch with a square 12x12mm body and a 10mm overall height measured from the board surface to the top of the stem, with 4 pins soldered into the board holes (Through-Hole / DIP). It works by pressing and returns to its position automatically when you lift your finger, and its contact is normally open (NO).

The 10mm height is taller than the 9mm version and shorter than the 12mm and 13mm versions, so choose according to the thickness of your front panel or the height of the plastic cap over the button. The 12x12mm body matches most ready-made board layouts according to the listing, and the 4 pins give stronger mechanical hold than versions with fewer pins.

Electrically, the rating is 12V DC / 50mA at signal level, the approximate pressing force is about 160gf, the button travel is very short at around 0.25mm, contact resistance is around 100mΩ or less, and the operating temperature range is -25°C to +70°C. A metal cover over the pressing mechanism protects it and extends its operating life.

Take care when wiring: the 4 pins are connected in pairs internally, so use the diagonally opposite pins, not the adjacent ones. Add a pull resistor with simple software filtering to handle contact bounce. Listed uses include control and Reset buttons in Arduino and ESP32 projects, control boxes and household appliances, keyboards and button matrices, and replacing damaged buttons of the same size.

The switch is new with a 1-month warranty, and the box holds one piece.

Suitable for

  • Reset and control buttons in Arduino and ESP32 projects
  • Control boxes and household appliances
  • Handmade keyboards and button matrices
  • Replacing damaged buttons of the same size

Seller's description

مفتاح تاكت لحظي بجسم مربع 12x12mm وارتفاع كلي 10mm يُقاس من سطح اللوحة إلى قمة الساق، وبأربعة أطراف تُلحم في ثقوب اللوحة. الارتفاع 10mm يجعله أعلى من نسخة 9mm وأقصر من نسختي 12mm و13mm، فيُختار حسب سمك الواجهة الأمامية أو ارتفاع الغطاء البلاستيكي فوقه. يعمل بالضغط ويعود إلى وضعه تلقائياً فور رفع الإصبع.

أبرز المزايا

  • جسم بقياس 12x12mm يطابق معظم مخططات اللوحات الجاهزة
  • أربعة أطراف تمنح تثبيتاً ميكانيكياً أقوى من نسخ الطرفين
  • تلامس لحظي مفتوح عادةً NO مناسب لمداخل المتحكمات الدقيقة
  • غطاء معدني يحمي آلية الضغط ويطيل عمر التشغيل
  • ساق بارتفاع 10mm تعبر الواجهات متوسطة السماكة بلا تمديدة إضافية

الاستخدامات الشائعة

  • أزرار التحكم وإعادة التشغيل Reset في مشاريع Arduino وESP32
  • صناديق تحكم وأجهزة منزلية بغطاء بلاستيكي فوق الزر
  • لوحات مفاتيح ومصفوفات أزرار مصنوعة يدوياً
  • صيانة الأجهزة واستبدال الأزرار التالفة بنفس المقاس

ملاحظة: الأطراف الأربعة متصلة زوجين داخلياً، لذا استخدم الطرفين المتقابلين قطرياً لا المتجاورين، وأضف مقاومة سحب مع فلترة برمجية بسيطة لمعالجة ارتداد التلامس Bounce.

What's in the box

مفتاح تاكت واحد

Specifications

Body size12x12mm
Overall height10mm
Pin count4 Pins (زوجان متصلان داخلياً)
Contact typeلحظي Momentary NO
MountingThrough-Hole (DIP)
Electrical rating12V DC / 50mA
Approximate forceنحو 160gf
Operating temperature-25°C إلى +70°C
مسافة حركة الزرقصيرة جداً بحدود 0.25mm
مقاومة التلامسمنخفضة بحدود 100mΩ أو أقل
مادة الغطاءغطاء معدني فوق آلية الضغط
استعمال شائعلوحات التحكم مع غطاء زر بارتفاع متوسط
CategorySemiconductors, ICs & Electronic Components
More categoriesElectromechanical components & connectors
ConditionNew
Warranty1-month warranty
SKUNTK-0141

Questions about مفتاح تاكت 12x12x10mm بأربعة أطراف Through-Hole لحظي | 12x12x10mm Tact Switch 4-Pin Through-Hole Momentary Push Button

It currently costs 1,750 IQD (was 2,500 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
Overall height is 10mm, measured from the board surface to the top of the stem.
The pins are connected in pairs internally, so use the diagonally opposite pins, not adjacent ones.
Yes, the listing mentions control and Reset buttons in Arduino and ESP32 projects, with a pull resistor and software filtering for bounce.
The rating is 12V DC / 50mA at signal level, so it is for signals, not loads.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.