Power resistor
مقاومة قدرة 50W بغلاف ألمنيوم بقيمة 12Ω وتفاوت ±5% | 50W Aluminium Housed Wirewound Power Resistor, 12 Ohm +/-5%
مقاومة قدرة 50W بغلاف ألمنيوم بقيمة 12Ω وتفاوت ±5% | 50W Aluminium Housed Wirewound Power Resistor, 12 Ohm +/-5% — 2,625 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- 50W dissipation, 12Ω value
- ±5% tolerance
- Ribbed RX24 aluminium body, 2 mounting holes
- Approx. 60 x 30 x 30 mm
- New, with a 1-month warranty
Ask about stock or request a better price
Price
2,625IQDIts price has held at 3,750 IQD for the last 11 days.
About this item
50W wirewound power resistor, 12 Ohm, ±5% tolerance, in an RX24 aluminium housing, usable as a test load or discharge resistor, new with a 1-month warranty.
This is a wirewound resistor with 50W dissipation, a value of 12Ω and ±5% tolerance, housed in a ribbed RX24 aluminium body with two mounting holes. The metal housing carries heat into the surface it is mounted on, which is why it handles much higher power than ordinary resistors of the same size. Its wirewound construction tolerates high current pulses, and there is internal insulation between the resistance element and the metal case.
According to the listing it is used as a test load for power supplies and transformers, as a discharge resistor for large capacitors after the circuit is switched off, as a braking resistor for DC motors and servo drives, and to limit charging current in battery circuits. The ±5% tolerance is sufficient for load and discharge applications.
Specifications include approximate dimensions of 60 x 30 x 30 mm, side solder-tab terminals, a maximum working voltage of about 24V at full power, an operating temperature range of -55°C to +200°C, and a temperature coefficient of about ±300 ppm/°C.
Important note from the listing: the 50W rating applies when mounted on a heat sink, and without mounting it does not exceed about 20% of that, so work out the power you need before choosing. Do not touch the body while it is running, because its temperature may exceed 200°C. The item is new and comes as one 50W / 12Ω aluminium-housed resistor without mounting screws, so you need to supply the screws yourself. The warranty is 1 months.
Suitable for
- Test load for power supplies and transformers
- Discharging large capacitors after switch-off
- Braking resistor for DC motors and servo drives
Seller's description
مقاومة سلكية بقدرة تبديد 50W وقيمة 12Ω وتفاوت ±5%، مغلّفة بجسم ألمنيوم مضلّع من نوع RX24 مع فتحتي تثبيت. الغلاف المعدني ينقل الحرارة إلى السطح المثبّتة عليه، ولهذا تتحمّل قدرة أعلى بكثير من المقاومات العادية بنفس الحجم. تُستعمل كحمل اختبار وكمقاومة تفريغ وكحامية تيار في دوائر القدرة.
أبرز المزايا
- قدرة تبديد 50W عند التثبيت على سطح معدني مناسب
- جسم ألمنيوم مضلّع مع فتحتي تثبيت بمسامير
- بنية سلكية Wirewound تتحمّل نبضات التيار العالية
- تفاوت ±5% كافٍ لتطبيقات الحمل والتفريغ
- عزل داخلي بين عنصر المقاومة والغلاف المعدني
الاستخدامات الشائعة
- حمل اختبار لمزودات الطاقة والمحوّلات
- مقاومة تفريغ للمكثفات الكبيرة بعد إطفاء الدائرة
- مقاومة كبح لمحركات DC وسواقات السيرفو
- تحديد تيار الشحن في دوائر البطاريات
ملاحظة: القدرة 50W معطاة عند التثبيت على مشتّت حراري؛ بدون تثبيت لا تتجاوز نحو 20% منها. احسب P = I²R قبل الاختيار، ولا تلمس الجسم أثناء التشغيل فحرارته قد تتجاوز 200°C.
What's in the box
مقاومة واحدة 50W / 12Ω بغلاف ألمنيوم (بدون مسامير تثبيت)
Specifications
| Resistance | 12Ω |
|---|---|
| Power rating | 50W (مع تثبيت حراري) |
| Tolerance | ±5% |
| Type | سلكية Wirewound بغلاف ألمنيوم (RX24) |
| Approx. dimensions | 60 x 30 x 30 mm |
| Max working voltage | نحو 24V |
| Terminals | طرفا لحام على الجانب |
| شكل الغلاف | ألمنيوم مضلّع ذهبي مع فتحتي تثبيت |
| مدى حرارة التشغيل | -55°C إلى +200°C |
| معامل الحرارة | نحو ±300 ppm/°C |
| Category | Semiconductors, ICs & Electronic Components |
| More categories | Passive electronic components |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0616 |




