Power resistor
مقاومة قدرة بغلاف ألمنيوم 10Ω قدرة 50W | 10Ω 50W Aluminium Housed Wirewound Power Resistor
مقاومة قدرة بغلاف ألمنيوم 10Ω قدرة 50W | 10Ω 50W Aluminium Housed Wirewound Power Resistor — 2,625 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- 10Ω and 50W with a heatsink
- About 2.2A maximum current at full power
- Ribbed aluminium housing with wirewound element
- Resistant to vibration, dust and humidity
- New, with a 1 months warranty
Ask about stock or request a better price
Price
2,625IQDIts price has held at 3,750 IQD for the last 11 days.
About this item
10Ω wirewound power resistor rated 50W in a ribbed aluminium housing, for power supply test loads, discharge and damping resistors.
This is a power resistor of 10Ω rated 50W in a ribbed aluminium housing. The wirewound resistance element is embedded in insulating resin inside the metal body, which carries heat into the mounting surface, so it is fixed with screws through the side arms onto a metal base or a heatsink. According to the listing, 10Ω is a common value for test loads, discharge circuits and damping resistors on power supply outputs.
The rated power of 50W is with a heatsink, and the real power depends on the contact area with the cooling surface. Without a heatsink the resistor cannot handle more than about 10-15W, so fix its whole flat face onto an aluminium surface and keep it away from plastic wires, because its surface reaches a temperature that burns insulation. The maximum current at full power is about 2.2A.
The stated specifications are a typical tolerance of ±5%, a typical operating range of -55°C to +200°C, non-polar terminals, and resistance to vibration, dust and humidity. Self-inductance is not negligible, making it unsuitable for high-frequency circuits.
The listed uses are a dummy load for testing power supplies and transformers, a discharge resistor for high-voltage capacitors after the device is switched off, a damping and protection resistor on inverter and amplifier outputs, and a current-limiting resistor in charging and test heating circuits. The item is new with a 1 months warranty, and the box holds one aluminium-housed power resistor, 10Ω / 50W.
Suitable for
- Dummy load for testing power supplies and transformers
- Discharge resistor for high-voltage capacitors
- Damping resistor on inverter and amplifier outputs
Seller's description
مقاومة قدرة بقيمة 10Ω وتصنيف 50W داخل غلاف ألمنيوم مضلّع. عنصر المقاومة الملفوف مغمور براتنج عازل داخل الجسم المعدني الذي ينقل الحرارة إلى سطح التثبيت، لذا تُشدّ ببرغيين على قاعدة معدنية أو مشتت حراري. القيمة 10Ω شائعة في أحمال الاختبار ودوائر التفريغ ومقاومات التخميد على مخارج مزودات الطاقة.
أبرز المزايا
- قيمة ثابتة 10Ω بتصنيف قدرة 50W مع تبريد صحيح.
- غلاف ألمنيوم مضلّع يحمي العنصر ويوزّع الحرارة على مساحة أكبر.
- تيار عبور يصل إلى 2.2A تقريباً عند القدرة الكاملة.
- عنصر ملفوف بمعامل حرارة منخفض يحافظ على القيمة أثناء التسخين.
- أذرع تثبيت ببراغي تجعل التركيب على الشاسيه سريعاً ومتيناً.
- مقاومة عالية للاهتزاز والرطوبة مقارنة بالمقاومات المكشوفة.
الاستخدامات الشائعة
- حمل وهمي لاختبار مزودات الطاقة والمحوّلات.
- مقاومة تفريغ لمكثفات الفولتية العالية بعد إطفاء الجهاز.
- مقاومة تخميد وحماية على مخارج الإنفرترات والمكبرات.
- مقاومة تحديد تيار في دوائر الشحن وتسخين الاختبار.
ملاحظة: بدون مشتت حراري لا تتحمّل المقاومة أكثر من 10-15W تقريباً؛ ثبّت وجهها المسطّح كاملاً على سطح ألمنيوم واترك مسافة عن الأسلاك البلاستيكية لأن سطحها يصل إلى حرارة تحرق العزل.
What's in the box
مقاومة قدرة واحدة بغلاف ألمنيوم 10Ω / 50W
Specifications
| Resistance | 10Ω |
|---|---|
| Rated power | 50W (مع مشتت حراري) |
| Element type | سلك مقاومة ملفوف (Wirewound) |
| Tolerance | ±5% (نموذجي) |
| Maximum current at full power | 2.2A تقريباً |
| مادة الغلاف | ألمنيوم مضلّع مع حشو راتنجي عازل |
| طريقة التركيب | تثبيت سطحي ببرغيين عبر أذرع جانبية |
| عدد الأطراف | طرفان (غير قطبية) |
| مدى حرارة التشغيل | -55°C إلى +200°C (نموذجي) |
| المحاثة الذاتية | غير مهملة، غير مناسبة لدوائر الترددات العالية |
| سلوك التبديد | القدرة الفعلية تعتمد على مساحة التلامس مع سطح التبريد |
| بيئة العمل | مقاومة للاهتزاز والغبار والرطوبة |
| Category | Semiconductors, ICs & Electronic Components |
| More categories | Passive electronic components |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0444 |




