OLED display module

شاشة OLED مقاس 1.3 إنش بدقة 64×128 بمتحكم SH1107 وواجهة I2C | 1.3 Inch OLED Display Module 64x128 SH1107 I2C Vertical

⁨شاشة OLED مقاس 1.3 إنش بدقة 64×128 بمتحكم SH1107 وواجهة I2C | 1.3 Inch OLED Display Module 64x128 SH1107 I2C Vertical⁩ — ⁨10,500 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Monochrome 1.3 inch OLED display
  • 64x128 pixels in a vertical layout
  • SH1107 controller with I2C interface
  • Operating voltage 3.3V – 5V
  • New, with a 1 months warranty
10,500IQDIn stock
1

Ask about stock or request a better price

Price

10,500IQD

Its price has held at 10,500 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Monochrome 1.3 inch OLED module at 64x128 pixels with an SH1107 controller and I2C interface, for Arduino and ESP32 projects.

A monochrome OLED display, 1.3 inches at 64x128 pixels in a vertical layout, built on an SH1107 controller and connected over an I2C interface through the VCC, GND, SCL and SDA pins. Each pixel lights itself with no backlight, giving high contrast and a viewing angle of more than 160° with low power draw that follows the number of lit pixels.

It runs on 3.3V – 5V, the default I2C address is 0x3C and can be changed to 0x3D, and it is supported by the U8g2 and Adafruit SH110X libraries. The listing states compatibility with Arduino, ESP32, ESP8266, STM32 and Raspberry Pi, and mounting is via 2.54mm header pins on the board edge.

Note that the controller is the SH1107, not the SSD1306, so choose the right type in the library or the image will appear shifted or cut off, and avoid leaving a static image for long hours to prevent burn-in. The item is new with a 1 months warranty.

Suitable for

  • Display interfaces for Arduino and ESP32 projects
  • Showing sensor readings such as temperature and humidity
  • Portable meters, clocks and small timers
  • Settings menus and status messages

Seller's description

شاشة OLED أحادية اللون بمقاس 1.3 إنش ودقة 64×128 بكسل بترتيب عمودي، مبنية على متحكم SH1107 وتتصل بأربعة أسلاك فقط عبر واجهة I2C. كل بكسل فيها يضيء ذاتياً بلا إضاءة خلفية، فتعطي أسوداً عميقاً وتبايناً عالياً وزاوية رؤية واسعة مع استهلاك تيار منخفض. مناسبة لواجهات القوائم وشاشات القراءة في مشاريع Arduino وESP32.

أبرز المزايا

  • دقة 64×128 بكسل بترتيب عمودي مناسب لعرض القوائم والقيم
  • واجهة I2C بأربعة أطراف VCC وGND وSCL وSDA فقط
  • تعمل بفولتية 3.3V أو 5V بفضل منظم ومترجم مستوى على اللوحة
  • تباين عالٍ جداً دون إضاءة خلفية وزاوية رؤية تتجاوز 160°
  • استهلاك منخفض يعتمد على عدد البكسلات المضاءة فعلياً
  • مدعومة بمكتبات U8g2 وAdafruit SH110X الجاهزة

الاستخدامات الشائعة

  • واجهات عرض لمشاريع Arduino وESP32 وESP8266
  • عرض قراءات الحساسات مثل الحرارة والرطوبة والفولتية
  • أجهزة قياس محمولة وساعات ومؤقتات صغيرة
  • قوائم إعدادات ورسائل حالة في الأجهزة المصنّعة يدوياً

ملاحظة: المتحكم SH1107 وليس SSD1306؛ اختر الصنف الصحيح في المكتبة وإلا ظهرت الصورة مزاحة أو مقطعة. وتجنّب ترك صورة ثابتة لساعات طويلة لتفادي احتراق البكسلات (burn-in).

What's in the box

وحدة شاشة OLED واحدة مقاس 1.3 إنش بواجهة I2C

Specifications

Screen size1.3 إنش قطرياً
Resolution64×128 بكسل (ترتيب عمودي)
ControllerSH1107
InterfaceI2C بأربعة أطراف (VCC، GND، SCL، SDA)
I2C address0x3C افتراضياً (قابل للتغيير إلى 0x3D)
Operating voltage3.3V – 5V
Viewing angleأكثر من 160°
نوع اللوحةOLED أحادي اللون بإضاءة ذاتية بلا Backlight
المكتبات المدعومةU8g2 وAdafruit SH110X
المتحكمات المتوافقةArduino، ESP32، ESP8266، STM32، Raspberry Pi
الاستهلاكمنخفض ويتناسب مع عدد البكسلات المضاءة
طريقة التركيبأطراف هيدر 2.54mm على حافة اللوحة
CategoryDisplays, TV & Home Entertainment
More categoriesDisplay panels & modules
ConditionNew
Warranty1-month warranty
SKUNTK-0548

Questions about شاشة OLED مقاس 1.3 إنش بدقة 64×128 بمتحكم SH1107 وواجهة I2C | 1.3 Inch OLED Display Module 64x128 SH1107 I2C Vertical

It currently costs 10,500 IQD from Nanotik on SinaaStore (updated 16 November 2026).
The controller is the SH1107, not the SSD1306, according to the listing, so pick the right type in the library.
0x3C by default, changeable to 0x3D, according to the listing.
U8g2 and Adafruit SH110X, according to the listing.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.